6.
Click Configuration - [LAN] link. Then the LAN Configuration page will
appear. In this page, you can configure LAN settings.
LAN configuration
IP Address
Subnet Mask
DHCP Server
DHCP address pool
selection
User Defined Start Address
User Defined End Address
Lease Time
User Mode
Ethernet Mode
IP address of the modem
Subnet mask of the modem
Select User Defined if you want to allocate the IP
addresses that will be assigned to the PCs.
Start address of IP address pool
End address of IP address pool
Select 0 if you want to auto-management
Only single user mode is working in this version
Select Autosense if you want to auto-sensing.
17
AHT-E300 ADSL ROUTER