Table of Contents
Advertisement
Key Tone
This feature allows the transceiver to sound a tone whenever the following
keys are pressed: Monitor (M) Button, Up/Down Buttons, MODE Button,
SCAN Button.
To turn the key tones on or off,
- From GMRS / FRS standby mode, press the MODE button
until bp,the Bell (
- Press the Up or Down Button to toggle the key tone feature On or Off.
- Press the PTT button momentarily to confirm selection.
When the key tone feature is on, the Bell icon appears steady on the display
and the beep tones sound in response to button activation.
Battery Alert
When the battery icon (
install fresh batteries. If the batteries are not replaced the (
appear and an audio tone will sound to warn the user that the batteries
must be replaced.
) icon, and On or oF flash on the LCD display.
) blinks on the LCD panel, recharge unit or
19
) icon will
128-xxxxx
19 of
Advertisement
Table of Contents
