Advertisement
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
WARNING: When using this device, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this instrument!
1.
WARNING! Do not look at the Sun or other strong light sources through
this instrument. Injury to eyes, even blindness may result. Do not use
this instrument to look at a Solar eclipse.
2.
Observe work area conditions. Do not use tools or instruments in damp or
wet locations. Don't expose to rain.
3.
Store idle equipment. When not in use, tools and instruments must be
stored in a dry location to inhibit rust. They should be put away properly to
prevent loss of small parts or damage.
4.
Maintain instruments with care. Keep tools and instruments maintained
and clean for better and safer performance. The various parts must be kept
clean, dry, and free from oil and grease at all times. When cleaning lenses
use only clean lens paper and an approved lens cleaner.
5.
Stay alert. Watch what you are doing and use common sense. Do not walk
or run with the instrument held to your eye. Do not look at bright lights through
the instrument.
6.
Check for damaged parts. Before using any tool or instrument, any part
that appears damaged should be carefully checked to determine that it will
operate properly and perform its intended function. Check for alignment and
binding of moving parts; any broken parts or mounting fixtures; and any other
condition that may affect proper operation. Any part that is damaged should
be properly repaired or replaced by a qualified technician.
7.
Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Approved
accessories are available from Harbor Freight Tools.
SKU 93233
For technical questions please call 1-800-444-3353 Page 3
Save This Manual
Safety Warnings and Precautions
Advertisement
