Dimensional Drawings - Sharp PN-655RU Operation Manual

Dimensional Drawings

Note that the values shown are approximate values.
1 7
/ [6] 5-
4
[150]
When mounting the monitor, read the manual of the brackets or stand for their mounting procedure.
The screw holes for mounting brackets (M10 x 4 holes) are provided on the rear of the monitor. Note
that screw hole depth of the monitor is 1-
resulting in serious personal injuries as well as damage to the product. The screw and hole should come
together with over
comply with UL1678 standard.
52
E
5
34-
Opening width
3
(31- /
9
1- /
16
[40]
5
36- /
/
8
1
39- /
3
3
/ inch (20 mm) length of thread. SHARP recommends using mounting interface that
4
/ [871]
16
[807])
4
9
1- /
16
[40]
[923]
16
[1003]
2
/ inch (30 mm). Loose holding may cause the product to fall,
16
Screw holes for mounting brackets
5
17- / [440]
16
Unit: inch [mm]