Safety
Safety and general precautions
WARNING: Always follow safe practices when working on or
around SITRANS WW100, especially in wet environments and
when adjacent to conductive steel mounting framework.
ALWAYS STOP the belt, lock-out, and/or place a "Do Not Energize"
tag on the main disconnect before working on or around the
weighfeeder.
Always follow established safe operating practices.
A weighfeeder can be dangerous. Pinch points exist along the belt line.
Note:
Secure the weighfeeder when:
•
replacing the belt
•
placing or removing the calibration test chain
•
working on or around the load cell
•
working on or around the speed sensor
•
working on or around the gearmotor
7ML19985MN01
SITRANS WW100 - OPERATING INSTRUCTIONS
Page 3