Notes For Connection; Connecting A Dvd Video Player; Connecting A Vcr/Game System (Av-1 And Av-2); Connecting Av Equipment (Av Input 3/ Av Out) - Sharp LC-28HM2 Operation Manual

Notes for Connection

Connecting a DVD Video Player

When connecting a DVD player, always connect it directly to this unit.
If the signals is input via a video deck, the picture may not be displayed properly.

Connecting a VCR/GAME System (AV-1 and AV-2)

When connecting game system: "Shooting games" played with a pistol cannot be used.

Connecting AV Equipment (AV INPUT 3/ AV OUT)

• You can output the video and audio signals of AV-1/2 from the AV INPUT 3/AV OUT terminal.
• Set AV-3 setting to "OUTPUT", and connect the AV INPUT 3/OUT terminal to an input terminal of a
video equipment, and you can record the received video and audio signal on the video equipment.
Note
• Component input signals and PC input signals are disabled for monitor output (recording).
• When using AV-1 or AV-2 with S-video input signal and the AV INPUT 3/AV OUT terminal is set to "OUTPUT", the
signal is converted to a regular video signal output from AV OUT.
Switching the AV INPUT/OUTPUT
POWER
INPUT
AV INPUT
1 2 3
COMPONENT PC
1 2
MUTE VOL
MENU ENTER
LCD MONITOR
Changing "OUTPUT" to "INPUT"
1
Set the AV-3 setting in the OPTION mode to "INPUT". For the opera-
tion, refer to "Adjusting the OPTION Settings" (page 27).
2
Select "AV-3" for the input source by using either the INPUT button or
the AV INPUT buttons.
AV-1 AV-2 AV-3
Changing "INPUT" to "OUTPUT"
* Select the input source other than "AV-3" before going to the OPTION
mode to perform Step 1.
1
Set the AV-3 setting in the OPTION mode to "OUTPUT".
For the operation, refer to "Adjusting the OPTION Settings" (page 27).
2
Select "FIXED" (for the optional side speakers) or "VARIABLE" (for a
commercially available speaker system).
Note
• FIXED: The sound level of the AV OUT is fixed and you can not adjust the
volume using the VOLUME buttons of the unit. Adjust the volume from the
AV equipment that is connected to the unit.
• VARIABLE: The sound level of the AV OUT is variable so that you can use
the VOLUME buttons of the unit to adjust the volume. Note that the sound
from the optional side speakers connected to the unit is muted.
• The default setting is "VARIABLE".
COMPONENT1 COMPONENT2
Indicator
PC
AV-3
29
US