Overview Of Operation Modes - Canon DADF-M1 Service Manual

Chapter 2

2.2.2 Overview of Operation Modes

MEMO
The machine executes the following 4 types of operation mode, executing individual
modes according to the instructions from the host machine for printing. The following table
shows these operation modes, outlines of the modes, and corresponding printing modes:
Operation mode
1. Normal rotation
pickup/delivery
2. Normal
rotation pickup/
reversal delivery
3. Idle feed/
reversal pickup/
reversal delivery
2-6
Outline of operation
picks up an original, and delivers
it after it has been read.
picks up an original, and reverses
and delivers it after it has been
read.
executes idle feed to find out the
size of the original; then, executes
idle feed so that the reading may
start with the face of the original;
then, picks up, reverses, and
delivers it after it has been read.
T-2-2
Corresponding printing mode
single-sided original -> single-
sided print
single-sided original ->
double-sided print
extra-length original>single-
sided print
double-sided original ->
double-sided print
double-sided original ->
single-sided print
double-sided original of
different configurations ->
double-sided print
double-sided original of
different configurations ->
single-sided print
double-sided original of same
configuration -> double-sided
print (inch-configuration
only)
double-sided original of same
configuration -> single-sided
prints (inch-configuration
only)
0002-7275