Remote Control Unit - Sharp AQUOS Z41G460184301A Operation Manual

Part Names

Remote Control Unit

• When using the remote control unit,
point it at the TV.
1 POWER: Switch the power on or enter
standby mode. (See page 24.)
2 0–9: Set the channel.
3 • (DOT): (See page 26.)
4 SURROUND: Display the surround setting
menu. (See page 27.)
5 FREEZE: Set the still image. Press again to
return to normal screen.
!
*(
6 SLEEP: Allows you to set a time when the
TV automatically switches to standby. This
display will disappear after a few seconds,
and the sleep timer automatically starts
counting down. (See page 26.)
• If you want to adjust the sleep timer
again, you can press this button
repeatedly then change the time setting.
• The TV will enter the standby mode
when the remaining time reaches zero.
7 EXIT: Turn off the menu screen.
8 CC: Display captions during closed-caption
source. (See page 28.)
9 AUDIO: Display the MTS/SAP setting
menu. (See page 27-28.)
10 FAVORITE CH:
A, B, C, D: Select 4 preset favorite channels
in 4 different categories. (See page 36 for
details.) While watching, you can toggle the
selected channels by pressing A, B, C and D.
11 DISPLAY: Display the current channel (or
input source) information on the screen.
12 INPUT: Select a TV input source.
(See page 26.)
13 MUTE: Mute the sound. (See page 26.)
14 VOL ( / ) : Set the volume. (See page 26.)
15 CH / : Select the channel.
! " # !
(See page 26.)
16 ENT: Jumps to a channel after selecting
with the 0–9 buttons.
17 FLASHBACK: Press to switch to the
previously tuned channel. Press again to
switch back to the currently tuned channel.
18 MENU: Display the menu screen.
19 * / + / , / - ENTER: Select a desired item
on the screen.
20 RETURN: Return to the previous menu
screen.
21 VIEW MODE: Select the Picture Mode.
(See page 29.)
22 AV MODE: Select an adjusted picture
settings. (Standard, Movie, Power Saver,
User, Dynamic) (See page 27.)