Preset; On-Screen Display Language Selection; Presetting The Channels (Auto) - Sharp AQUOS LC-15B5M Operation Manual

Preset

On-Screen Display Language Selection

MENU on the LCD TV set can also be used to select the
language.
Upper control panel
1
Press MENU (PRESET-1) on the upper part of the
LCD TV set for more than 2 seconds to display the
PRESET mode screen.
Auto ( B/G )
VHF 1
48.25MHz
2
Press MENU (PRESET-1) twice to display the
LANGUAGE select mode screen. Press MENU
(PRESET-1) again to change the PRESET mode as
shown below.
AUTO MANUAL
NOTE
• Instead of pressing MENU for more than 2 seconds, you can
display the LANGUAGE select mode by selecting Setup →
Language on the Menu screen (see page 18).
3
: SELECT O K : ENTER
Press CH ( )/(
to display.
4
Press TV/VIDEO to return to the normal screen.
12
3 1, 2 4
LANGUAGE NORMAL SCREEN
E n g l i s h
M : BACK E : EXIT
) to select the language you wish

Presetting the Channels (AUTO)

Automatically tunes in and presets receivable TV stations.
Make sure the antenna cable is properly connected.
Upper control panel
2
1
Press MENU (PRESET-1) on the upper part of the
LCD TV set for more than 2 seconds. The AUTO
mode screen appears.
Sound System
A u t o ( B / G )
V H F 1
4 8 .2 5 M Hz
2
Press VOL (–)/(+) (PRESET-2) on the upper part of
the LCD TV set. All the TV stations in your area that
can be received by the LCD TV set are automatically
preset.
3
The screen shows whatever is on channel 1 when full
auto channel preset is finished.
NOTE
• When starting PRESET after setting the SOUND SYSTEM with
MENU of the Remote Control, the SOUND SYSTEM for all channels
are stored into memory.
• Unused channels are automatically skipped.
• The Preset mode is only available in the TV mode and cannot be
operated in the AV mode.
1
1
PAL
B/G