Connecting An Audio Amplifier; Connecting A Pc - Sharp AQUOS LC-19SB28UT Operation Manual

Connecting to External Equipment

Connecting an Audio Amplifier

■ When using coaxial cable:
It is possible to output audio through the DIGITAL AUDIO COAXIAL terminal.
Rear of the TV

Connecting a PC

■ When using HDMI cable (INPUT 3):
Rear of the TV
NOTE
• Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable to
the INPUT 3 (HDMI) terminal, connect an audio cable to the AUDIO PC/HDMI terminal and set "HDMI1 Audio" to "DVI". (See
page 27.)
• The HDMI terminals only support digital signal.
■ When using DVI-HDMI conversion cable (INPUT 3):
Rear of the TV
NOTE
• When using an DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting an DVI-HDMI conversion cable to the INPUT 3 (HDMI) terminal, connect an audio cable to the AUDIO PC/HDMI
terminal and set "HDMI Audio" to "DVI". (See page 27.)
16
Coaxial cable
DVI-HDMI conversion cable
Ø 3.5 mm stereo minijack cable
COAXIAL
DIGITAL AUDIO INPUT
HDMI-certified cable
HDMI OUT HDMI OUT
DVI OUT AUDIO