Sharp Aquos LC 26D5U Operation Manual page 31

Watching TV (TV Guide On Screen)
New manual recording
Aside from setting recordings using the program
LISTINGS menus, you can also define the schedule of
recordings manually by following the steps below.
1
Press a/b to select the program you want
to record.
2
Press MENU to display "Record Options".
3
Press a/b to select "new manual recording"
and then press ENTER.
• "Record Options" screen displays.
Setup
Selectable items
items
date
start
end
channel
input analog/digital air/
digital cable/input 1/
input 2/input 3/
recorder VCR/i.LINK
once/weekly/daily/off
frequency
4
Press ENTER to highlight "schedule
recording".
5
Press ENTER again to exit.
NOTE
• The program set to be manually recorded is listed by
channel number in the SCHEDULE.
30
Description
Set a date to record
—
Set a start time to
—
record
Set an end time to
—
record
Set a channel to
—
record using 0–9
Set the external
recording device or
antenna source
Select a recorder you
connected
Set the recording
cycle
New manual reminder
Instead of setting a reminder from the program
LISTINGS, you can set a reminder manually for a
program that you want to watch or a recording you
have set.
1
Press a/b to select the program you want
to set reminder.
2
Press MENU to display "Remind Options".
3
Press a/b to select "new manual reminder"
and then press ENTER.
• "Remind Options" screen displays.
Setup
Selectable items
items
date
—
start
—
end
—
channel
—
input analog/digital air/
digital cable/input 1/
input 2/input 3/
power on TV yes/no
yes/no
auto tune TV
frequency
once/weekly/daily/off
4
Press ENTER to highlight "schedule
reminder".
5
Press ENTER again to exit.
NOTE
• The program set to be manually reminded is listed by
channel number in the SCHEDULE.
Description
Set a date to remind
Set a start time to
remind
Set an end time to
remind
Set a channel to
remind using 0–9
Set the external
device or antenna
source
When this is set to
"yes", the TV will
automatically switch
on at the time the
reminder was set for.
When this is set to
"yes", the channel will
be automatically
changed before the
reminder screen is
displayed.
Set the reminder cycle