Part Names Of The Main Unit; Listening With Headphones - Sharp Aquos LC 20D30U Operation Manual

Part Names of the Main Unit

Controls
Upper control panel
CH ( ) / ( )
VOL ( ) / ( )
Speaker
OPC (Optical Picture
Control) sensor
Remote sensor
A
• INPUT, CH ( )/( ), VOL (
Fundamentally, this operation manual provides a description based on operation using the remote control.
■ Plug the headphone mini-plug into the headphone jack located on the front of the main unit.
A
• Headphones are not included in the supplied accessories.
• No sound is heard from the main unit speakers when a headphone mini-plug is connected into the headphone jack.
• Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.
INPUT
MENU POWER
Headphone jack (
Plug the headphone mini-plug into the headphone jack
located on the front of the main unit.
OPC (Optical Picture Control) indicator
The OPC indicator lights up green when "OPC" is set to "ON".
(See page 21.)
POWER/WAKE UP TIMER indicator
POWER/WAKE UP TIMER indicator lights up green when the power is on,
and red when in the standby mode (the indicator will not light when the main
power is off), and orange when the wake up timer is set (the indicator will light
when in the standby mode).
+
–
)/( ) and MENU on the main unit have the same functions as the same buttons on the remote control.

Listening with Headphones

Headphones
How to adjust the angle
Tilt the display by grabbing onto the
carrying handle while securely holding
down the stand with your other hand.
To change the vertical angle of the LCD TV
set, tilt the screen up to 2.5 degrees forward
or 10 degrees backward. Please adjust
the angle so that the LCD TV set can be
watched most comfortably.
)
▼ On-screen display
VOLUME
10
Adjust the sound volume using VOL (
remote control.
+
–
)/( ) on the
11