Table of Contents
Advertisement
Supplied accessories
Make sure the following accessories are provided with the product.
Remote control unit (X1)
Page 8
NOTE
• Always use the AC cord supplied with the TV.
QUICK REFERENCE
Attaching the stand
•
Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal.
•
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
•
Attach the stand in the correct direction.
•
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1
Confirm the 8 screws supplied with the TV.
Short screws (
X
(used in step 2)
2
Remove the covering sheet of the stand.
Attach the base to the post.
1
Attach the base to the 4 screws into the 4 holes on
2
the bottom of the base.
Hex key
Screw
6
"AA" size battery (X2)
Page 8
4)
Long screws (
X
(used in step 3)
AC cord (X1)
Page 7
3
Insert the stand into the openings on the bottom of
1
4)
the TV.
Insert and tighten the 4 screws into the 4 holes on the
2
rear of the TV.
4
For protection, sheets
are covering the product.
Please remove these
sheets before use.
NOTE
• To detach the stand, perform the step in reverse order.
Stand unit (X1)
Operation manual (X1)
Page 6
Hex key
Screw
Soft cushion
Advertisement
Table of Contents
