Siemens MJ-XL Installation Manual page 2

The information contained herein is general in nature and not intended for specific application purposes. It does not relieve the user of
responsibility to use sound practices in application, installation, operation, and maintenance of the equipment purchased. Siemens
reserves the right to make changes in the specifications shown herein or to make improvements at any time without notice or obligations.
Should a conflict arise between the general information contained in this publication and the contents of drawings or supplementary
material or both, the letter shall take precedence.
Authorized and qualified Personnel
For the purpose of this manual a qualified person is one who is familiar with the installation, construction or operation of the equipment
and the hazards involved. In addition, he has the following qualifications:
(a) Is trained and authorized to de-energize, clear, ground, and tag circuits and equipment in accordance with established safety
practices.
(b) Is trained in the proper care and use of protective equipment such as rubber gloves, hard hat, safety glasses or face shields,
flash clothing, etc., in accordance with established safety practices.
(c) Is trained in rendering first aid.
These instructions do not purport to cover all details or variations in equipment, nor to provide for every possible contingency to be met in
connection with installation, operation, or maintenance. Should further information be desired or should particular problems arise which
are not covered sufficiently for the purchaser's purposes, the matter should be referred to the local sales office, listed on the back of this
instruction guide.
The contents of this instruction manual should not become part of or modify any prior or existing agreement, commitment or relationship.
The sales contract contains the entire obligation of Siemens Power Transmission & Distribution Inc. The warranty contained in the
contract between the parties is the sole warranty of Siemens Power Transmission & Distribution Inc. Any statements contained herein do
not create new warranties or modify the existing warranty.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
DANGER
This equipment contains hazardous voltages.
Will cause death or serious Injury.
To prevent:
De-energize and ground the equipment before
maintenance.
Only qualified personnel should work on this
equipment after becoming thoroughly familiar
with all warnings, safety notices, instructions
and maintenance procedures contained herein.
The successful and safe operation of this
equipment Is dependent upon proper handling,
installation, operation and maintenance.
NOTE
SUMMARY