Using With The Rechargeable Battery - Sharp MD-MT888H Operation Manual

Using with the Rechargeable Battery

MD-MT888H
10
„ Charging
When the rechargeable battery is used for the first time
or when you want to use it after a long period of disuse,
be sure to charge it fully.
1
Insert the rechargeable battery.
2
Connect the AC adaptor.
3
Place the unit on the battery charger.
z When the portable MD is turned on or operating, the
battery will not be charged.
z No operation can be performed whilst charging. If you
try to operate, "CH" will appear.
z After the rechargeable battery is charged or used, it
will get slightly warm. This is normal.
Caution:
z Use the specified battery AD-N55BT only. Do not
charge a battery (nickel-cadmium, alkaline, etc.) other
than that specified.
z Do not remove the outer cover of the re-
chargeable battery. It may cause heat gen-
eration, fire, or explosion.
z Do not dip the battery in water, do not dis-
pose of it in a fire, and do not take it apart.
z If the rechargeable battery terminal is dirty, charging
may not start. In such a case, wipe off the dirt with a
dry cloth.
z Do not disassemble the battery.
01/8/30 2.fm