Sharp 32F641 Operation Manual page 21

Parent Control (V-CHIP Operation) (Continued)
•
Activating the V-CHIP BLOCK
1
Repeat steps 1 to 4 of [1] MPAA RATING.
2
Press CH a/s to move the "E" mark to "STATUS". Press VOL
k/l to activate the V-CHIP BLOCK. (If STATUS is OFF, V-CHIP
BLOCK will not operate.)
3
Press MENU, then "INPUT SECRET No." will be displayed.
Note:
• If SECRET No. is already set, skip to step 5.
4
Enter a 4-digit SECRET No. using the REMOTE KEYPAD.
5
Press MENU and the SECRET No. will be registered.
•
To temporarily cancel the V-CHIP BLOCK
1
"V-CHIP HAS BEEN ACTIVATED" appears if you view a program
with the same program rating data you configured.
Note:
• "V-CHIP HAS BEEN ACTIVATED" will not be displayed if STATUS is not configured to "ON".
2
Press MENU, then "INPUT SECRET No." will be displayed.
3
Enter the 4-digit SECRET No. using the REMOTE KEYPAD, then
V-CHIP BLOCK temporarily will be canceled. If the wrong SECRET
No. is chosen, "SECRET No. IS INCORRECT" will be displayed.
Input the SECRET No. again in this case.
Note:
If you turn the Power ON from OFF, the V-CHIP BLOCK will be activated again.
•
CH
→
CH
MENU
1 2 3
4 5 6
7 8 9
ENTER
0 100
MENU
MENU
1 2 3
4 5 6
7 8 9
ENTER
0 100
MPAA
TV GU I E D L I NES
DOWNL OAD : OF F
STATUS : ON
I NPUT SECRET No .
– – – –
I NPUT SECRET No .
1 2 3 4
2 2
V–CH I P HAS BEEN ACT I VATED
TV–Y 7
FV
I NPUT SECRET No .
– – – –
I NPUT SECRET No .
21