Using The Video And Audio Input Jacks - Sharp 32N-S500 Operation Manual

Sharp color television operation manual 32n-s500
Hide thumbs Also See for 32N-S500:
Table of Contents

Advertisement

Using the Video and Audio Input Jacks

L Connecting video equipment for playback of video material.
• When the television is connected to video equipment as shown below, the material being played back on the video equipment can be seen
on the television screen.
Connecting video device equipped with video output terminal.
CONNECTIONS
(Front connection
terminals of TV)
VIDEO
IN 2
L-AUDIO-R
Signal
To AUDIO OUTPUT
To VIDEO OUTPUT
Video Equipment
L To watch video material playback.
• Press the Remote's INPUT to select the VIDEO INPUT mode to which the video equipment you want to playback is connected.
• The external VIDEO INPUT mode will change as follows each time the INPUT is pressed.
AIR
VIDEO 1
VIDEO 2
or
(IN 1)
(IN 2)
CABLE
Rear
Front
• INPUT mode can be selected by pressing either the CH UP ( 8 ) on the TV remote control when the TV is set to the highest channel stored
in memory, or by pressing the CH DOWN ( 9 ) when it is set to the lowest channel.
NOTE:
• When connecting video or audio equipment to the television, be sure that the power is turned off in order to prevent damage to either the
television or the equipment being connected.
• An S-VIDEO terminal has priority over its corresponding VIDEO terminal (IN 1 or IN 3). When you want to watch pictures from video
equipment connected to a VIDEO terminal, unplug equipment connected to the corresponding S-VIDEO terminal.
• It is the intent of SHARP that this product be used in full compliance with the copyright law of the United States and that prior permission be
obtained from copyright owners whenever necessary.
• For detailed information on the connection and use of auxiliary equipment, refer to the instruction manuals of the equipment being used.
• The connection cords can be obtained from your local video store.
TO S-VIDEO OUTPUT
(When your video equipment
has an S-VIDEO output terminal).
(When your video equipment has an S-VIDEO output terminal).
To AUDIO INPUT (L)
To AUDIO INPUT (R)
To VIDEO INPUT
VIDEO 3
(IN 3)
Rear
VIDEO EQUIPMENT
CAMCORDER
(Rear connection terminals of TV)
IN 1
S-VIDEO
IN 1
IN 3
TO S-VIDEO OUTPUT
TV GAME
LINE IN
LINE
OUT
IN 3
VIDEO
L
AUDIO
R
25

Advertisement

Table of Contents
loading

Table of Contents