Copyright 2004 by Harbor Freight Tools ® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions, please call 1-800-444-3353.
Keep bystanders, children, and visitors away while operating a Food Slicer. Distractions can cause you to lose control. When not in use, keep this Food Slicer out of reach of children. For technical questions, please call 1-800-444-3353. SKU 91611 Page 2...
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. For technical questions, please call 1-800-444-3353. SKU 91611 Page 3...
Page 4
Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect operation. If damaged, have the Food Slicer serviced before using. Many accidents are caused by poorly maintained appliances. For technical questions, please call 1-800-444-3353. SKU 91611 Page 4...
ADDITIONAL SAFETY RULES Maintain labels and nameplates on the Food Slicer. These carry impor- tant information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Avoid unintentional starting. Make sure you are prepared to begin work before turning on the Food Slicer.
Page 6
Food Slicer to ensure that all parts are working properly. Clean the Food Slicer after every use. Failure to follow all of the cleaning instructions and warnings may result in serious illness due to food poisoning. For technical questions, please call 1-800-444-3353. SKU 91611 Page 6...
Your tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the following illustration. (See Figure A.) FIGURE A For technical questions, please call 1-800-444-3353. SKU 91611 Page 7...
If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Figure C.) For technical questions, please call 1-800-444-3353. SKU 91611 Page 8...
Page 9
FIGURE C to five volts at 150% of the rated amperes. SYMBOLOGY Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current Amperes No Load Revolutions xxxx/min. per Minute (RPM) For technical questions, please call 1-800-444-3353. SKU 91611 Page 9...
When unpacking, check to make sure all the parts shown on the Parts List on page 13 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
For safety, when the Food Slicer is not in use, reposition the Thickness Adjustment Knob (1) so that the sharp edge of the Blade (22) is covered. SKU 91611 For technical questions, please call 1-800-444-3353. Page 11...
Do not use damaged equipment. After each use, clean the Slicer following the instructions in the box on page 6. The Slicer should always be unplugged when not in use. For technical questions, please call 1-800-444-3353. SKU 91611 Page 12...
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 91611 For technical questions, please call 1-800-444-3353. Page 13...
ASSEMBLY DIAGRAM Note: The Plastic Wrench (38) is not shown. NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. For technical questions, please call 1-800-444-3353. SKU 91611 Page 14...