Approvals - ACR Electronics OWL series Reference Manual

OWL Data Loggers
5
Readings:
Resistance to X-rays:
1.1.7

Approvals

For our U.S. Customers:
ACR's circuitry design has been tested and found to comply with the limits for Class A digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the
interference at his/her expense.
For our Canadian Customers:
ACR's circuitry design does not exceed Class A limits for radio noise emissions as set out in
Schedule V to VIII of the Radio Interference Regulations of Communications Canada.
Specifications are subject to change without notice.
Continuous (first in, first out) or stop when full at
user-programmable intervals between 0.2 seconds and 12
hours.
Tested for protection against a 160 kV 150 mA-sec. dose @
38 in. F.F.D. (about 100 times that of an airport X-ray
machine). Tested for protection against Gamma Ray
(equivalent to 0.1337 - 1.38 mega volts) IR 192 - 28 curies @
30 second exposure source to object distance 5".
Copyright © 2010 ACR Systems Inc. All Rights Reserved.