Sharp MD-MT20H Operation Manual page 30

Portable minidisc recorder
Hide thumbs Also See for MD-MT20H:
Table of Contents

Advertisement

Combine
1
Start playing the last of the two tracks
you want to combine, and press the 06
button.
The unit will enter the pause mode.
2
Press the EDIT button to select "COM-
BINE".
1
2
To combine the fifth
and sixth tracks
3
Press the ENTER/SYNC button.
To cancel the operation, press the
/:OFF button.
3
(Confirming the combination)
4
Press the ENTER/SYNC button again.
The two tracks will be combined, and
the unit will be paused at the begin-
ning of the combined track.
The numbers assigned to the tracks
following the combined track will be
decreased by one automatically.
To combine two non-adjacent tracks:
First, put the two tracks next to each other
in the order you want using the MOVE func-
tion (page 28). Then combine them using
the COMBINE function.
When one or both tracks to be combined
have a name:
The first track name will be used. However,
when the first track does not have a name,
the second track name will be used.
In the following cases, tracks cannot be
combined.
Tracks recorded in the monaural long-
play mode and tracks recorded in the
stereo mode.
Tracks recorded from digital inputs and
tracks recorded from analogue inputs.
Tracks whose recording time is less than
12 seconds.
* MD-MT20H FOR UK(22-42)
Disc name
Discs can be named using a maximum
of 100 characters.
Up to 1,700 characters (approximately)
can be used in the disc and track names
on a single MiniDisc.
1
Whilst in the stop mode, press the
EDIT button to select "DISC NAME".
2
Press the ENTER/SYNC button.
The unit will enter the character input
mode.
To cancel the operation, press the
/:OFF button.
1
3
Press the DISPLAY button repeatedly to
select the type of characters.
The first 3 characters in the group of
the selected characters will be dis-
played for about 1 second.
ABC
(Capital letters)
(Lower-case letters)
abc
(Numbers and symbols)
123
4
Press the 5 or 4 button repeatedly
to select the first letter in the name.
When the button is pressed continu-
ously, the displayed character will
change rapidly.
3
29
30
2
Cursor
4
99.3.11, 2:30 PM

Advertisement

Table of Contents
loading

Table of Contents