Jump-Starting And Charging The Battery - SMART FORTWO 2018 Owner's Manual

X
Unscrew the filler hose from the valve on
the sealed tyre.
Please note that tyre sealant may escape
when unscrewing.
X
Screw the valve cap onto the valve of the
sealed tyre.
X
Pull the tyre sealant bottle out of the tyre
inflation compressor. The filler hose
stays on the tyre sealant bottle.
X
Drive to the nearest qualified specialist
workshop and have the tyre changed
there.
X
Have the tyre sealant bottle and filler
hose replaced as soon as possible at a
qualified specialist workshop.
Adjusting the tyre pressure
Increasing the tyre pressure
X
Switch on the tyre inflation compressor.
X
Observe the display.
Reducing the tyre pressure
X
Press button : next to pressure
gauge ;.
i Even unused tyre sealant loses its
effectiveness over time.
Have the tyre sealant bottle replaced
every four years at a qualified specialist
workshop.

Jump-starting and charging the battery

Jump-starting and charging the bat-
tery
Please note
G
WARNING
Work carried out incorrectly on the bat-
tery can lead, for example, to a short cir-
cuit and thus damage the vehicle elec-
tronics. This can lead to function restric-
tions applying to safety-relevant sys-
tems, e.g the lighting system, the ABS
(anti-lock braking system) or the ESP
(Electronic Stability Program). The oper-
ating safety of your vehicle may be
restricted.
You could lose control of the vehicle, for
example:
when braking
R
in the event of abrupt steering
R
manoeuvres and/or when the vehicle's
speed is not adapted to the road condi-
tions
There is a risk of an accident.
In the event of a short circuit or a similar
incident, contact a qualified specialist
workshop immediately. Do not drive any
further. Always have work on the battery
carried out at a qualified specialist work-
shop.
Further information about ABS (
®
and ESP (
G
WARNING
During charging and jump-starting,
explosive gases can escape from the bat-
tery. There is a risk of an explosion.
Particularly avoid fire, naked flames, cre-
ating sparks and smoking. Ensure there
is sufficient ventilation while charging
and jump-starting. Do not lean over a
battery.
G
WARNING
During the charging process, a battery
produces hydrogen gas. If a short circuit
Y
page 60).
175
®
Y
page 57)
Z