Sharp CS-2635H Operation Manual page 6

5/4
ROUNDING SELECTOR:
Example: Set decimal selector to "2".
÷
4 9 = 0.444 ... , 5
5/4
Note: The decimal point floats during successive calculation by the use of
If the decimal selector is set to "F" then the answer is always
rounded down ( ).
CONSTANT / ADD MODE SELECTOR:
"K" : The following constant functions will be performed:
Multiplication: The calculator will automatically remember the first
Division:
"•": Neutral
"A": Use of the Add mode permits addition and subtraction of numbers
without entry of the decimal point. When the Add mode is activated,
the decimal point is automatically positioned according to the deci-
mal selector setting.
Use of
decimally correct answers will be printed at the preset decimal
position.
GT
GRAND TOTAL MODE SELECTOR:
"GT": This selector will accumulate the following:
(" ✱ +" will be printed.)
1. Addition and subtraction totals obtained with
2. Product and quotient totals obtained with
3. Answers obtained with
"•": Neutral
PAPER FEED KEY
÷
9 = 0.555 ...
4 9
0.45
0.44
0.44
or .
number entered (the multiplicand) and
The calculator will automatically remember the second
number entered (the divisor) and
, , and
5 9
0.56
0.56
0.55
will automatically override the Add mode and
or .
– 4 –
instruction.
instruction.
.
or .