Fault Codes; To Turn Unit Off; Fresh Air Vent Control - Sharp AF-S155NX Installation And Operation Manual

FAULT CODES

If the display reads "ES" or "AS", a sensor has failed.
Contact your Authorized SHARP Service Center.

Fresh Air Vent Control

The Fresh Air Vent allows the air conditioner to:
1. Recirculate inside air - Vent Closed (see Fig. 1)
2. Draw fresh air into the room - Vent Open (see Fig. 2)
3. Exchange air from the room and draws fresh air into the room - Vent and Exhaust
Open (see Fig. 3)
Fig. 1 (OFF)
(4-WAY)

TO TURN UNIT OFF:

Fig. 2 (FRESH AIR)
The louvers will allow you to direct the air flow Up or Down and Left or Right throughout
the room as needed.Rotate the Auger Wheel Up or Down until the desired direction is
obtained.
AUGER WHEEL
DO THIS:
PRESS POWER
ON/OFF
Fig. 3 (VENT)