Salus AKL01P Wiring Manual

Warning
• This product must be installed by qualified personnel and the installation must comply with the codes and regulations applicable to the municipality where this product
is installed. Failure to do so could lead to injury, death or prosecution.
• Always disconnect the AC power before installing or working on AC power components.
For PDF Installation guide go to
www.salusinc.com
Technical Helpline 1-855-557-2587
AKL01P Zone Pump Wiring Center

Electrical Connections

24 VAC Thermostat Connections
R / H 24 VAC
W / Call for Heat
C / N 24 VAC common
Dry Contacts (rated 120 VAC, max. 2 A)
XX Active Pump(s)
120 VAC Connections
AC Line In
L
Zone Pump Line Out (max. 1/6 HP)
N AC Neutral
Earth Ground
LED indicators
Name
Color Meaning
Power 120 VAC power ON
Zone 1 Zone pump active
Wiring Guide
Fuse:
5A slow blow,
5x15mm (2AG)
Operational Summary
Zone Pump
The Zone pump will be activated
when the thermostat calls for heat.
Auxiliary Output
XX: Contact closure when any
zone is ON.
Issue Date: Apr 2017