Transferring Calls; Connecting To Voicemail; Conference Calling - Panasonic KX-TPA60 User Manual

Making and Answering Calls
•
To place a call, you may predial your extension number or trunk access code and number
you wish to dial then press the green Talk key. You may also press the Talk key first and once
you have a dial tone you may dial your desired number.
•
To answer an incoming call, press the green Talk key while the handset is ringing.
•
To place a call on hold, press the HOLD/MSG key.
•
To pick up a call on hold, press the HOLD/MSG key.

Transferring Calls

•
To Blind Transfer a call, press the XFER/CLR button while on a call. This will automatically put
the call on hold. Then dial the extension you wish to transfer to and press the XFER/CLR
button again.
Note: You cannot blind transfer to an outside number.
•
To Supervise a Transferred call, press the XFER/CLR button while on a call. This will
automatically put the call on hold. Then dial the number or extension you wish to transfer to
and wait for the other party to answer. When you are ready to transfer the call, press the
XFER/CLR button again.
Answering a Call Waiting Call
Note: You must have either single or multiple call waiting set for your extension on the MaxCS
server.
•
While on the first call you will see the second call in the display flashing. To switch to that
call, press the Soft Key A. Your first call will be placed on hold.
•
To return to that call, press the soft key C. That will place your second call on hold and
return you to the first call. You can continue to use soft key C to swap between the calls.

Connecting to Voicemail

While the phone is idle, press and hold the HOLD/MSG key and you will be connected to the
Altigen Voicemail. You will be prompted via the receiver to enter your voicemail password.

Conference Calling

Note: Hosting a conference call is not supported at this time.
Retrieving A Call from Line Park
To retrieve a call from line park, dial #51 followed by the line park number that the call is
parked on.
Panasonic KX User Guide for MaxCS Page 4