Has Not - JVC HR-XVC1U User Manual

Timer recording can be programmed
on-screen with the remote control.
The built-in timer allows automatic
unattended recording of up to 8
programs within 1 month.
TV
VCR DVD
DVD MENU MARKER RETURN
DISPLAY A.TRK C.RESET
SUB TITLE ANGLE
SP/EP
PLAY
ZOOM TITLE
MODE
0
TIMER TV/VCR
PLAY
STOP
NOTE:
• If the clock symbol( ) blinks when the
timer recording ended, the TV program
has not been completely recorded
because of an insufficient tape supply.
Press TIMER to cancel the timer
program or press EJECT to remove
the cassette tape.
• To use the VCR while it is in timer
recording standby mode, press
TIMER, then press VCR to change to
VCR mode. After you use the VCR,
press TIMER again to put the VCR into
timer recording standby mode.
• If you press TIMER during timer
recording, the recording operation will
be interrupted. If you press TIMER
again within the programmed time, the
recording operation will start again.
• After a power failure or disconnection
of the power plug, all programmed
recording setting and time display will
be lost upon resumption of power. In
this case, reset the clock (see pages
15-17.) and reprogram any timer
recordings.
Preparation:
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode.
• Load a cassette tape with the erase prevention tab intact.
• Make sure with OSD that the time and date are correct.(see
page 27).
Example: Program a timer recording for the 26th day, channel 125
POWER
(CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: EP).
1
OPEN/
CLOSE
ZERO RETURN
2
SEARCH
MODE
REPEAT
A-B
TV
POWER
INPUT
3
TV VOL
4
5
6
Press SETUP MENU. Check the
TIMER REC SET optionTIMER REC
SET optionTIMER REC SET option is
selected, then press ENTER.
Press SET + or – to select one of the
program line, then press ENTER.
Press SET + or – to select the date,
then press ENTER.
Set the start time, end time, channel
and tape speed as in step 3.
NOTE:
• Press CANCEL to move cursor backward
for correction.
• To record from external source set the
channel to "L". "L" will appear next to CH 125
(or 69).
To enter other programs, repeat step 2
through 4. Or, press SETUP MENU
twice to return to the normal screen.
Press TIMER. The clock symbol(
and the VCR stands by for recording. At the same time, VCR
mode will change to DVD mode automatically. You can use
DVD even if the VCR is in the Timer recording mode.
If you do not use the DVD, turn the power off.
NOTE:
•
If the clock symbol(
of the pressing of TIMER, the cassette may not have been
loaded yet.(see page 18)
•
If the cassette is ejected in spite of the pressing of TIMER , the
erase prevention tab of the cassette may have been
removed.(see page 18)
Timer Recording
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT
CH SET UP
SAP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
〈+/–/ENTER/MENU〉
DATE
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
– – – – –
〈+ / – /ENTER/CANCEL/MENU 〉
DATE
26(SU)
------
------
------
------
------
------
------
〈+/–/ENTER/CANCEL/MENU〉
) will appear on the display
) does not appear on the display in spite
ON OFF
ON OFF
ON OFF
START END CH
– : – – – : – – – – –
– : – – – : – – – – –
– : – – – : – – – – –
– : – – – : – – – – –
– : – – – : – – – – –
– : – – – : – – – – –
– : – – – : – – – – –
– : – – – : – – – – –
CH
START END
-:-- -:-- --- -
-:-- -:-- --- -
-:-- -
-:-- ---
-:-- -:-- --- -
-:-- -:-- --- -
-:-- -:-- --- -
-:-- -:-- --- -
-:-- -:-- --- -
31