Digital Signal Processor; Introduction Of Dsp Adjustments - Pioneer DEQ-P7650 Operation Manual

Section
03

Digital Signal Processor

Introduction of DSP
adjustments
By carrying out the following settings/adjust-
ments in the order shown, you can create a fi-
nely-tuned sound field effortlessly.
1 Setting the speaker setting
2 Using the position selector
3 Auto TA and EQ (auto-time alignment and auto-
equalizing)
4 Adjusting the time alignment
5 Adjusting the speaker output levels using a
test tone
6 Selecting a cross-over frequency
7 Adjusting the speaker output levels
8 Adjusting 3-band parametric equalizer
1 DSP display
Shows the DSP function names.
2 Subwoofer indicator
Shows when the subwoofer output is turned
on.
% Press AUDIO to display the DSP func-
tion names.
Press AUDIO repeatedly to switch between
the following DSP functions:
POSI (position selector)FAD (balance ad-
justment)SLA (source level adjustment)
DRC (dynamic range control)DIRECT (di-
rect)Lo/Ro (down mix)
# When selecting the FM tuner as the source,
you cannot switch to SLA, DRC.
# When playing other than the DVD disc, you
cannot switch to DRC.
6
En
All manuals and user guides at all-guides.com
2 2 2
1
# To return to the display of each source, press
BAND/ESC.
Note
If you do not operate the DSP function within
about 30 seconds, the display is automatically re-
turned to the source display.