Table of Contents
Advertisement
Portal configuration commands
display portal acl
Syntax
display portal acl { all | dynamic | static } interface interface-type interface-number
View
Any view
Default level
1: Monitor level
Parameters
all: Displays all portal access control lists (ACLs), including dynamic ones and static ones.
dynamic: Displays dynamic portal ACLs, namely, ACLs generated after a user passes portal
authentication.
static: Displays static portal ACLs, namely, ACLs generated by related configurations.
interface interface-type interface-number: Displays the ACLs on the specified interface.
Description
Use the display portal acl command to display the ACLs on a specific interface.
Examples
# Display all ACLs on interface GigabitEthernet 0/0.
<Sysname> display portal acl all interface gigabitethernet 0/0
GigabitEthernet0/0 portal ACL rule:
Rule 0
Inbound interface : GigabitEthernet0/0
Type
Action
Source:
IP
Mask
MAC
Interface : any
VLAN
Protocol
Destination:
IP
Mask
Rule 1
Inbound interface : GigabitEthernet0/0
Type
Action
: static
: permit
: 0.0.0.0
: 0.0.0.0
: 0000-0000-0000
: 0
: 0
: 192.168.0.111
: 255.255.255.255
: static
: redirect
31
Advertisement
Table of Contents
