Table of Contents
Advertisement
1
Safety Instructions
Read carefully before using and be sure to follow the instructions.
∗ The precautions described below are intended to protect the user and other individuals from physical
harm and to safeguard against damage to property.
Be sure to follow the instructions since they are important safeguards.
∗ Do not remove the safety instructions seal attached to the product.
Safety instructions are classified and described as shown
below, according to the level of harm and damage caused
by improper use of ignoring instructions.
This indicates "There is a possibility
of death or serious injury
improper handling of the unit is taken
Warning
by the user.
This indicates "There is a possibility
of injury
or damage to property
*2
when the unit is improperly handled
Caution
by the user.
*1: "Serious injury"is defined here as a medical condition such as loss of
sight, injuries, burns (high-temperature or low-temperature burns),
electric shocks, broken bones or poisoning which will have after-
effects and/or which will require hospitalization or long-term outpatient
care.
*2: "Injury"is defined here as a physical injury, a scald or an electric shock
which will not require hospital treatment or long-term outpatient care.
*3: "Damage to property"is defined here as damage extending to buildings,
household effects, domestic animals, pets, etc.
Extra attention must be paid when used in a household where infants or toddlers are present.
Do not allow infants or toddlers to lick the
area where the power plate is connected.
Extra attention must be paid to avoid
electric shock or injuries.
Do not allow children to use the
appliance by themselves, and do not
use in areas within the reach of infants
or toddlers, this is to avoid scalds,
electric shock, or injuries.
This appliance is not intended for use by
persons (including children) with physical
difficulties or lack of experience and
knowledge - unless they have been given
supervision or instruction concerning
to the use of the appliance by a person
responsible for his/her safety.
3
Description of symbols used
The
symbol indicates a warning
or caution. The specific details
of the warning or caution are
" when an
*1
indicated inside the symbol or in a
picture or text near the symbol.
The
symbol indicates an action
which is prohibited. The specific
"
*3
details of prohibited matters are
indicated inside the symbol or in a
picture or text near the symbol.
The
symbol indicates an action
or instruction to be taken.
The specific details of instructed
matters are indicated inside the
symbol or in a picture or text near
the symbol.
Warning
Attach the lid tightly until a "clicking"
sound is heard.
Failure to do so may inhibit boiling or cause scalds
if the electric kettle were to fall or spill hot water.
Do not touch or allow your face or other
parts of your body to get close to the
steam vent or spout.
Especially keep out of the reach of infants
Do not
and toddlers.
touch or
contact
Caution
Do not use on an unstable surface,
especially on a table or rug that is
vulnerable to heat.
Failure to do so may cause a fire, or scalds if
the electric kettle falls and spills hot water, or
a color hange/deformation on the table or rug.
Do not modify.
Do not allow anyone other than a repair
technician to disassemble or repair the
appliance,this is to avoid fire,electric shock, or
Disassemble
injuries.
is prohibited.
Use the product at local Voltage only.
Using the product at any other voltage may
result in fire or electric shock.
Use an AC outlet of 7A or higher
exclusively for the product.
Connecting other instruments with the same
AC outlet may cause the branch socket to
overheat, resulting in fire.
Do not use a damaged power cord, and
do not damage the power cord.
(Protect the power cord, do not use force,
place near a high humidity area, pull, twist,
bundle, place something heavy on top, or tuck.)
Failure to do so may cause fire or electric
shock.
If the power cord has been damaged,
purchase a new one from the Tiger product
retailer where you purchased the product.
If dust collects on the outlet, completely
wipe off the dust, this is to avoid fire.
Firmly insert the plug into the outlet to
avoid electric shock, shorting, smoke, or
fire.
Do not use the product if the power cord
or plug is damaged or the plug in the
outlet is loose, this is to avoid electric
shock, shorting, or fire.
Do not plug in or unplug with wet hands,
this is to avoid electric shock or injury.
Do not
touch the
unit with
wet hand.
Do not exceed the full water level mark,
this is to avoid scalds due to hot water
spillage.
Do not exceed the full water level mark; this is
to avoid scalds due to hot water spillage.
Do not attach the lid too forcefully.
Do not open or close the lid for a few
moments after the water has boiled.
This may cause scalds due to the steam.
Warning
Do not place the product on a gas
flame or use it with an electrical heater,
induction heating cooker, microwave oven
or other such appliances; this is to avoid
fire, discoloration due to exposure to
heat, deformation, or malfunction.
Do not insert pins, wires or other metal
objects (foreign objects) into the areas
where the main unit and power plate are
connected. Do not allow dust or dirt to
adhere to these areas.
This may cause electric shocks, shorting or fire.
Do not block the steam vent with a
cleaning cloth or other items, this is to
avoid scalds due to hot water spillage or
deformation of the lid.
Do not boil anything other than water.
Pouring tea, milk, sake, tea bags, tea leaves,
or instant food into the electric kettle may
form bubbles and cause scalds due to hot
liquid spillage. This may also cause scalds,
corrosion, malfunction, or peeling of the
fluoropolymer-coated surface.
Do not use as an ice cooler.
Cold water or ice may cause dew condensation,
electric shock, or other problems.
Do not hold the main unit in your arms
close to your body, tilt or rock it, shake it
up and down vigorously or jolt it.
Do not tilt or tip even if it is "locked," this is to
avoid scalds due to hot water spillage.
Do not tip over the product.
Do not tilt or tip even if it is "locked," this is to
avoid scalds due to hot water spillage.
Do not drop or jolt the power plate; this
is to avoid overheating, problems in
operation or electric shocks.
4
Advertisement
Table of Contents
