Table of Contents
Advertisement
SETUP
OUTPUTS
MOD 1
DERIVATIV
Fig. 52. Setup - Outputs - Mod Out - Derivative.
SETUP
OUTPUTS
MOD 1
SCHEDULE
Fig. 53. Setup - Outputs - Mod Out - Schedule.
SETUP
OUTPUTS
MOD 1
HIDE
Fig. 54. Setup - Outputs - Mod 1/2 - Hide.
T775A/B/M SERIES 2000 ELECTRONIC STAND-ALONE CONTROLLERS
SETUP
OUTPUTS
MOD 1
DERIVATIV
0
SEC
ENTER
DERIVATIVE
TIME FOR
MOD 1
M24516
SETUP
OUTPUTS
MOD 1
SCHEDULE
YES
NO
USE
SCHEDULE
FOR
OUTPUTS
M24517
SETUP
OUTPUTS
MOD 1
HIDE
YES
NO
HIDE MOD 1 ON
HOME SCREEN
M28656
23
2.3.1.4. DERIVATIVE
The Derivative default value is factory set to zero (no
derivative control). It is strongly recommended that the
derivative remain at zero (0) unless you have a very good
reason to adjust it. Derivative control is not needed in the
vast majority of HVAC applications.
1. From the Mod menu, use the
to highlight DERIVATIV.
2. Press the
button to display the Derivative
seconds.
3. Use the
and
the value.
Default: 0 (zero)
Range: 0 to 3,600 seconds
4. Press the
button to accept the seconds and
return to the Mod menu.
2.3.1.5. SCHEDULE
The Schedule option displays only if the USE SCHED
parameter is set to Yes (See "2.3.3.1. USE SCHED" on
page 25).
1. From the Mod menu, use the
to highlight SCHEDULE.
2. Use the
and
NO.
Default: YES
3. Press the
button to accept the selection and
return to the Mod menu.
Each output can be set up to follow or ignore the built in
scheduler. To disable the scheduler for all outputs, see
"2.3.3.1. USE SCHED" on page 25.
2.3.1.6. HIDE
The Hide option is used to prevent the MOD 1 and MOD 2
outputs from displaying on the Home screen.
1. From the Mod menu, use the
to highlight HIDE.
2. Use the
and
NO.
Default: YES
3. Press the
button to accept the selection and
return to the Mod menu.
NOTE: The MOD1 and MOD2 outputs are still active
even when hidden from the Home screen.
and
buttons
buttons to increase/decrease
and
buttons
buttons to highlight YES or
and
buttons
buttons to highlight YES or
62-0254—13
Hide quick links:
Advertisement
Table of Contents
