Editing The Setting.ini File - Epson TM-i Series Easy Setup Manual

Editing the setting.ini file

The setting.ini file is written as follows. Edit the contents to match your settings.
 Although it might not be necessary to set a particular item, do not delete that item.
 Refer to general ini files for details about the format of character strings in the setting.ini
 For the following one-byte symbols, use the corresponding URL encoded strings in the
[General]
Administrator = "Tom"
Location = "Counter001"
[WiredLinkLayer]
LinkSpeed="AutoNegotiation"
[WiredNetwork]
IPAddressSettingMethod ="Manual"
APIPA="Disable"
IPAddress="172.150.1.2"
SubnetMask="255.255.255.0"
Gateway="172.150.1.100"
DNSServerSettingMethod="Manual"
DNSServerAddress1="172.150.1.201"
DNSServerAddress2="172.150.1.202"
DNSServerAddress3="172.150.1.203"
[WirelessLinkLayer]
NetworkMode="Infrastructure"
SSID="SSID.ueda"
AdhocChannel="1"
CommunicationStandard="802.11b/g"
AuthenticationMethod="WPA2PSK"
EncryptionMethod="AES"
DefaultWEPKey="WEPKey1"
WEPKey1="epson"
WEPKey2="12345"
WEPKey3="12345"
WEPKey4="12345"
PresharedKey="epson1234"
12
file.
setting.ini file.
 " (Double quotation mark):
 % (Percent):
 & (Ampersand):
 + (Plus sign):
 ; (Semicolon):
 \ (Reverse slant):
%22
%25
%26
%2B
%3B
%5C
Wired LAN settings
Wireless LAN settings