Table of Contents
Advertisement
Remote
MP3 Player
REC PLAY
7. ABOUT THE POWER SOURCE
The WA-1830 Series Wireless Meeting Amplifier is designed to operate on both home-use AC power and
specified rechargeable battery.
7.1. Using AC Power Supply
Remove the power cord from the component compartment, and connect to a standard AC outlet. Always be
sure the unit's power is switched OFF before connecting or disconnecting the power cord from the AC outlet.
Notes :
• Approximately 1 W is continually consumed even if the power switch is set to the OFF position.
• When the unit is not used, detach the power cord from the AC outlet.
10
Operating Mode
* MP3 Mode (USB or SD)
PSET
- Press button MODE (display AUX)
and then press button AUX REC
(will save input from AUX IN,
WIRED MIC, WIRELESS MIC
at SD as first priority and then
USB card and volume control
is made Max).
- View second will be record
Display text appear " rEC " and time.
- Press button
again
will continue to Record.
(for prepared recording).
- Press button AUX REC again
will stop, and will be saved in
the last space of the folder.
* FM Mode
- Press button AUX REC enter the
station saving mode.
- Press PLAY to save the current
frequency as a station or press
F
or F
on the remote control
to choose channel position for
saved frequency.
- Press button AUX REC for 3 sec
to actually save this frequency to
this position.
* MP3 Mode (USB or SD)
- Press this buttons will enter
RECORD folder and play the
first tack in it.
4.
Beginning play in CH01
AUX Mode and insert SD card
1.
Display AUX mode
6.
Display AUX mode
to hold, press
5.
Record start at SD
FM Mode
1.
Display normal play
FM Mode
4.
Display normal play
USB install
1.
Display normal play
Indication
3.
Until CH30
2.
Press AUX REC
3.
Record start at SD
4.
Time indication blinking
2.
CH initial frequency
3.
If Select no 9, frequency
CH09 same with CH02
2.
Play the first tack in it.
Advertisement
Table of Contents
