How To Use; Control Panel Features - Kenmore 796.3143 Series Use & Care Manual

WARNING:

CONTROL PANEL FEATURES

A
Press to turn the washer ON. Press again to turn
the washer OFF. Pressing the POWER button dur-
ing a cycle will cancel that cycle and any load
settings will be lost. The lid will unlock after a
brief pause.
NOTE:
CYCLE SELECTOR BUTTON
B
Press the cycle button to select the desired cycle. Press
the Specialties button repeatedly to cycle through
the specialty cycles. Once the desired cycle has been
selected, the standard presets will appear in the dis-
play. These settings can be adjusted using the cycle
setting buttons any time before starting the cycle.
NOTE: To protect your clothing, not all settings are available on all cycle selections.

HOW TO USE

E A B
C
C
Press this button to start the selected cycle.
If the washer is running, use this button to pause the
cycle without losing the current settings.
NOTE
D CYCLE MODIFIER BUTTONS
Use these buttons to adjust the settings for the se-
lected cycle. The settings light up above the
buttons to show the current selection.
E
SPECIAL CYCLE AND OPTION BUTTONS
These buttons allow you to select special cycles or
options.
TIME AND STATUS DISPLAY
F
The display shows the cycle status and estimated
time remaining.
12
F
D