Parameters
5.1
Parameters of the I/O module DI 8x230VAC HA
Configuring
You configure the I/O module with PCS 7 V9.0 or higher.
Parameters
You define the functioning of the I/O module via parameters.
See also
Parameter assignment (Page 26)
5.2
Module/channel parameters
Parameters of the DI 8x230VAC HA
You have the following setting options:
Table 5-1
Parameters and their default settings
Parameters
Channel activated
Potential group
5.3
Explanation of the module/channel parameters
Channel activated
Specifies whether a digital input is activated or deactivated.
Digital Input Module DI 8x230VAC HA (6DL1131-6GF00-0PK0)
Manual, 12/2017, A5E39401560-AB
Value range
● Enabled
● Disabled
● Use potential group of the
left module
● Allow new potential group
[ID: 91078990219]
Default
Parameter reassign‐
ment in RUN
Enabled
Yes
Use potential
No
group of the left
module
[ID: 80193473547]
Efficiency range
Channel
Module
[ID: 80193676683]
5
15