Nintendo 2DS Operation Manual page 3

1
Charge the system and turn the power on
Charge the battery
Connect your system to the AC adapter as shown below (see page 9 for details).
Logo faces up
Turn the power on
Press the Power Button (POWER).
2
Swing prongs out
Recharge LED will light up.
It will turn off when the battery
is fully charged.
The stylus is used to control actions on the
lower Touch Screen.
Slide the stylus from the stylus holder on the bottom of
the Nintendo 2DS.
2
Configure your basic system settings
First select a language. Then you will need to configure the basic system settings listed below. Using the
stylus on the lower screen, follow the on-screen instructions. If a child will be using the Nintendo 2DS
system, an adult should assist with these settings.
Date and Time
Profile
Internet Settings
Parental Controls
IMPORTANT: Please see page 17 for more information
on Parental Controls.
3
Play a game on a Game Card
NOTE: A Game Card should only be inserted or removed from the Game Card slot when the power is turned
off, or when the HOME Menu is displayed after exiting the software.
Inserting a Game Card
From the HOME Menu, tap the icon for the Game Card
you are using, then tap Open. See the manual for the
The label on the Game Card
Game Card for game play details. (If a built-in manual is
faces the bottom of the system.
available, you will also be able to tap Manual.)
When your settings are complete,
press the HOME Button ( ) on
the front of the system.
Starting a game
3