Husqvarna 556 Operator's Manual page 3

3. Throttle trigger lockout
4. Rear handle
5. Information and warning decal
6. Start/stop switch
7. Fuel level window
8. Fuel tank
9. Starter rope handle
10. Starter housing
11. Chain oil tank
12. Bar tip sprocket
13. Guide bar
14. Saw chain
15. Muffler
16. Chain brake and front hand guard
17. Front handle
18. Decompression valve
19. Switch for heated handles (560 XPG, 562 XPG)
20. Right hand guard
21. Throttle trigger
22. Product and serial number plate
23. Oil pump adjustment screw
24. Clutch cover
25. Chain catcher
26. Spiked bumper
27. Transportation guard
28. Operator's manual
29. Combination wrench
30. Brake band
31. Bar bolts
32. Vibration damping system, 3 units
33. Spark plug
34. Spark plug cap
Symbols on the product
Be careful and use the product correctly.
This product can cause serious injury or
death to the operator or others.
Read the operator's manual carefully and
make sure that you understand the
instructions before you use this product.
Always wear approved protective helmet,
approved hearing protection and eye
protection.
This product complies with applicable EC
Directives.
587 - 001 - 29.10.2018
Noise emission to the environment complies
with applicable EC Directives. The noise
emission of the product is specified in
Technical data on page 33 and on the
label.
Chain brake, engaged (right). Chain brake,
disengaged (left).
Choke.
Decompression valve.
Air purge bulb.
Adjustment of the oil pump.
Fuel.
Chain oil.
If your product has this symbol it has heated
handles.
yyyywwxxxx
Note: Other symbols/decals on the product refer to
certification requirements for some markets.
EU V
WARNING: Tampering with the engine
voids the EU type-approval of this product.
The rating plate shows se-
rial number. yyyy is the
production year and ww is
the production week.
3