Table of Contents
Advertisement
Menu functions
6. If necessary, enter the Bluetooth PIN needed for
pairing and press <OK>.
Receiving data via Bluetooth
To receive data via Bluetooth, your phone's Bluetooth
feature must be active and you set other devices to
search for your phone.
1. If an unauthorised Bluetooth device sends data to
your phone, press <Yes> to allow the device to
access your phone.
2. Press <Yes> to receive data.
Infrared
(Menu 9.7)
Use this feature to send and receive data through the
infrared (IrDA) port. To use an infrared connection,
you must do the following:
•
Configure and activate an IrDA-compliant infrared
port on the other device.
•
Activate the infrared feature on your phone; select
Infrared → Activate.
84
•
Align the infrared port on the
phone with the infrared port
on the other device.
If there is no communication
between your phone and the other
IrDA-compliant device within 60
seconds of activating the feature,
it is automatically deactivated.
Security
(Menu 9.8)
Use this menu to protect the
phone against unauthorised use by managing the
several access codes of your phone and SIM card.
If you enter an incorrect PIN/PIN2 three times in
succession, the SIM card is blocked. To unblock it
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
service provider.
PIN check
(Menu 9.8.1)
The 4- to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
Advertisement
Table of Contents
