Adjusting The Signal Sound Volume; Selecting The Doorbell Melody - Silvercrest SFS 52 B2 Instructions Manual

SFS 52 B2
_289974_SFSS2B2_LB9.indb 15

Adjusting the signal sound volume

Press the VOL button 4 repeatedly until the
desired volume is set .
Loud

Selecting the doorbell melody

There are 52 different doorbell melodies
stored in the appliance .
Press the melody select button 5 .
♦
Stop the selection when you hear the
♦
desired melody . The appliance will use the
last-played melody .
If you remove the receiver from the power
▯
socket, the set melody remains saved for
approximately 40 seconds. After this time,
you need to set your desired melody anew.
Medium
US - EN │ 15
Quiet
■
25.08.17 09:3