Application Backup And Restore - Fujitsu TeamPad500 System User Manual

3.5 Application Backup and Restore

The operating environment for a configured application program can be saved. By restoring a
saved application environment, the equipment can be returned to the state in which the environment
was last saved. Backup/Restore can also be used to move an application from one RAM Object
Store based system to another (clone an application).
To save or restore an application environment, press "4" at the "Setup Menu". The following
selection window will then open.
[1] Backup the Application radio button.
Perform a Backup operation if the "OK" box is pressed.
[2] Restore the Application radio button
Perform a Restore operation if the "OK" box is pressed.
[3] Browse button
Locate another storage area, other than Storage Card 1 or 2.
[4] OK button
Continue Backup or Restore Operation. Continue to next Window.
[5] Cancel button
Return to the "Setup Menu".
Copyright 2001 by Fujitsu-ICL Systems Inc.
28 of 47
TeamPad 500 User's Guide