Quick Start - SII SLP 410 Quick Start Manual

Quick Start

Install the software before connecting the SLP printer to your computer.
Installing the Smart Label Program for Mac OS X
1 Insert the Smart Label CD. If the installer does not appear automatically, double-click
the CD on your desktop or in the left pane of a new Finder window.
2 Double-click the file SIISmartLabelPrinter.mpkg. The installer will appear. Follow the
on-screen instructions.
3 For Mac OS X 10.2: After installation is complete, open Print Centre and select your SLP
printer. Mac OS X 10.3 or 10.4 will automatically set up your printer.
Installing the Smart Label Program for Windows
1 Insert the Smart Label CD. The installation wizard starts automatically on most systems.
If the introductory screen doesn't appear after a few seconds, continue with the
following steps.
2 Click the Windows Start button then point to Settings and choose Control Panel.
3 Double-click Add/Remove Programs then click the Install button. Follow the install
wizard to assist with installation.
Using your SLP 410, 420, 430, 440, and 450
with Windows 2000 and XP or Mac OS
®
GB
X 10.2 or later.
®