Seiko POWERLITE 7500 UB User Manual
  1. Manuals
  2. Brands
  3. Seiko Manuals
  4. Projector
  5. POWERLITE 7500 UB
  6. User manual
Seiko POWERLITE 7500 UB User Manual

Seiko POWERLITE 7500 UB User Manual

Home theater projector
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
PowerLite
Pro Cinema 7500 UB
Home Theater Projector
User' s Guide

Advertisement

Table of Contents
loading

Related Manuals for Seiko POWERLITE 7500 UB

Summary of Contents for Seiko POWERLITE 7500 UB

  • Page 1 ® PowerLite Pro Cinema 7500 UB Home Theater Projector User’ s Guide...
  • Page 2 Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product.

  • Page 3: Table Of Contents

    Contents Introduction Projector Parts Front Back Bottom Projector Control Panel Remote Control Button Map Optional Accessories Registration and Warranty Using This Manual Setting Up the Projector Choosing a Location Installing the Projector Connecting the Cables Connecting Video and Computer Equipment Making Other Connections Installing Batteries in the Remote Control Turning the Projector On and Off...
  • Page 4 Advanced Color Adjustments Adjusting the Gamma Setting Adjusting RGBCMY Locking the Projector Making Detailed Adjustments Using the Menu System Changing How the Menus Display Adjusting the Picture Quality Input Brightness Settings Sharpness and Picture Quality Settings Color Settings Adjustments for Computer Images Selecting Memory Settings and Resetting the Projector Selecting Memory Settings Creating Memory Settings...
  • Page 5 Problem Solving What To Do When the Lights Come On or Flash Solving Picture Problems Solving Remote Control Problems Where To Get Help Specifications General Lamp Remote Control Dimensions Electrical Environmental Safety Compatible Video Formats ESC/VP21 Command Codes Notices Important Safety Information FCC Compliance Statement Declaration of Conformity Epson America, Inc.
  • Page 6 Contents...

  • Page 7: Introduction

    Introduction The PowerLite ® Pro Cinema 7500 UB projector lets you enjoy theater-quality images in the relaxing environment of your own home. Designed especially for home cinema use, it offers these outstanding features: ■ Native 1080p (1920 × 1080) resolution, dynamic contrast ratio up to 75000:1, and up to 1600 lumens of brightness (white light output and color light output) for incredibly rich, sharp images in any room lighting ■...

  • Page 8: Projector Parts

    Projector Parts Front Lamp cover Ventilation slots Horizontal lens shift dial Back Component video port HDMI ports Air intake (filter) Introduction Control panel (top) Focus ring Lens cover Infrared receiver S-Video port Video port Cable holder Vertical lens shift dial Control panel (side) Zoom ring...

  • Page 9: Bottom

    Bottom Mounting bracket attachment points Optional cable cover attachment points (brass colored) Projector Control Panel Top control panel Power button Source button Switches the video input source Warning lights Side control panel Menu button Enter button Displays the Selects menu items or menus opens the line menu Menu navigation...

  • Page 10: Remote Control Button Map

    Remote Control Button Map Power button Turns projector on or off Default button Restores default settings when menu is displayed Menu navigation buttons Memory button Recalls custom picture settings RGBCMY button Adjusts the hue, saturation, and brightness for each color Gamma button Adjusts the gamma values of the screen display...

  • Page 11: Optional Accessories

    Optional Accessories Epson provides the following optional accessories for the projector: Product Replacement lamp Air filter replacement Kensington security lock (anti-theft device) Cable cover Projector mount You can purchase accessories from an authorized Epson reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S.

  • Page 12: Using This Manual

    Using This Manual This book contains all the information you need to use the projector, in addition to basic setup and maintenance instructions, troubleshooting tips, important safety instructions, specifications, and warranty information. Please follow these guidelines as you read through the manual: Warning: Must be followed carefully to avoid bodily injury.

  • Page 13: Setting Up The Projector

    Setting Up the Projector Follow the instructions in this section to choose a location for the projector, connect the cables, and display an image. Choosing a Location You can install the projector for the viewing setups shown below, as well as rear projection. Center Side Ceiling...
  • Page 14 Ideally, keep the projector level and place it at a height so its lens is centered between the top and bottom of the screen, as shown below. If this is not possible, you can use the lens shift dials to reposition the image. As a rule of thumb, you can use lens shift to move the image up or down by nearly its full height, and left or right by about one-half its width (for details, see page 26).
  • Page 15 The size of the image is determined by the distance from the projector’s lens to the screen. Depending on your display settings and how you use the Zoom ring, the actual size may differ. Use this table as a rough guide for projector placement: 16:9 aspect ratio Diagonal image size Projection distance...
  • Page 16 Projection distance 14.4 to 30.7 feet 4.40 to 9.36 m 18 to 38.4 feet 5.51 to 11.71 m 24.2 to 51.3 feet 7.36 to 15.62 m To determine the exact image size when you know the projection distance (or the exact projection distance when you know the desired image size), you can use the Projection Distance Calculator.

  • Page 17: Installing The Projector

    Installing the Projector To install the projector, you first need to determine the location, based on the size of your screen (maximum diagonal image size). Use the table on page 15 as a guide to positioning the projector. To suspend the projector from a ceiling, you will need the optional projector mount designed for the projector.
  • Page 18 The following illustrations show the dimensions of the projector: 5.4 in. 136 mm 0.5 in. 12 mm M4×9mm Setting Up the Projector 0.2 in. 4.5 mm 131 mm 17.7 in. 450 mm 11.8 in. 300 mm 5.9 in. 150 mm 2.2 in.

  • Page 19: Connecting The Cables

    Connecting the Cables Connecting Video and Computer Equipment You can connect the projector to many types of video equipment, such as a VCR, DVD player, digital tuner, cable or satellite box, video game console, camcorder, or digital camera. You can also connect it to a desktop or laptop PC or Apple on compatible video formats, see page 67.
  • Page 20 For best results, connect your video equipment to the equipment doesn’t support HDMI, connect it to one of the following ports (highest quality listed first): Component When you connect a large or heavy cable to the projector, such as an HDMI cable, it is recommended that you fasten it to one of the two holders using a commercially available cable tie.

  • Page 21: Making Other Connections

    Making Other Connections Connect the power cable and other cables described below, depending on how you plan to use the projector. ■ Plug the power cable into the projector and a grounded electrical outlet. ■ port outputs a 12-volt DC signal Trigger out when the projector is turned on.

  • Page 22: Installing Batteries In The Remote Control

    Installing Batteries in the Remote Control The remote control uses two AA batteries. Warning: Keep batteries away from children. If a battery is swallowed, contact your doctor immediately. 1. Release the tab and lift open the cover. 2. Insert two new AA batteries as shown. 3.

  • Page 23: Turning Off The Projector

    4. Press the Ppower button on the remote control or projector. Remote control Note: To prevent children from turning on the projector, you can use the Child Lock feature. See page 32 for details. If you’ll be using the projector at an altitude above 4900 feet (1500 meters), turn on High Altitude Mode so the fan can properly cool the projector at the high altitude air pressure.

  • Page 24: Selecting The Image Source

    Selecting the Image Source The source buttons on the projector and remote control let you switch between images from different pieces of equipment connected to the projector (such as a DVD player, cable or satellite box, or video game console). Press the button on the remote control that corresponds to the port to which your Source...

  • Page 25: Positioning The Image

    Positioning the Image If the image is not centered on the screen, use the horizontal and vertical lens shift dials to adjust its position. Caution: Do not try to move the lens by hand, or you may damage the projector. Always use the lens shift dials to change the lens position.
  • Page 26 The image cannot be moved to the maximum distance in both the vertical and horizontal directions. For example, the image cannot be shifted vertically when it has been shifted horizontally by the full amount. When the image has been shifted vertically by the full amount, it can be shifted up to 9 percent of the width of the image.

  • Page 27: Making Basic Adjustments

    Making Basic Adjustments Follow the instructions in this chapter to make basic adjustments to the image shape, size, color, and quality. For further refinements, see “Making Detailed Adjustments” on page 33. Focusing and Zooming Use the focus ring to sharpen the image. Use the zoom ring to reduce or enlarge the image.

  • Page 28: Choosing The Aspect Ratio

    Choosing the Aspect Ratio In many cases, video signals are automatically resized to fit on your screen when You may need to change the size of the image (or aspect ratio) for certain image types by pressing the on the remote control. Select one of these settings: ■...

  • Page 29: Choosing The Color Mode

    Choosing the Color Mode You can change the Color Mode to automatically adjust brightness, contrast, and color, letting you quickly optimize the projected image for various lighting environments. You can also select a different color mode for each input source—which is useful if you view different types of images from different sources.

  • Page 30: Advanced Color Adjustments

    Advanced Color Adjustments To further customize the color and image quality, you can adjust the gamma and individual RGBCMY color tones. (Not available when is selected as the Color Mode.) x.v.Color RGBCMY Gamma Note: You can fine-tune these and other color and image quality settings using the projector’s menu system (see page 33).

  • Page 31: Adjusting Rgbcmy

    2. Do one of the following: ■ Select one of the numeric correction values using the u or d button on the remote control and press the right. The horizontal axis represents the input signal level, and the vertical axis represents the output signal level.

  • Page 32: Locking The Projector

    Locking the Projector The projector includes two lock settings to prevent the image from being accidentally changed once it’s adjusted, and to keep children from turning on the projector without adult supervision. To access the lock settings, follow these steps: 1.

  • Page 33: Making Detailed Adjustments

    Making Detailed Adjustments You can use the projector’s on-screen menus to make detailed adjustments to the image quality—such as the brightness, contrast, sharpness, and color. You can also change the menu display, sleep mode settings, and other projector features. Using the Menu System You can access the menu system either from the remote control or the buttons on the projector’s control panel.
  • Page 34 4. Press the u, d, l, or r button to change settings as necessary. You may have to press the button to confirm your choice. Enter 5. When you’re finished, press the button to exit the menu system. Menu To display one of the line menus, press the bottom of the image: Press the u or d button to select the setting you want to adjust: ■...

  • Page 35: Changing How The Menus Display

    Changing How the Menus Display Use these options to control how the menus display. ■ Language Settings > Language Select from 21 languages to use in the menu system. ■ Menu Position Settings > Display > Menu Position Use the arrow buttons to choose a position on the screen for displaying the menu. ■...
  • Page 36 ■ Brightness Image > Brightness Adjust the brightness so it’s suitable for your viewing conditions. For example, if you’re projecting in a brightly lit room or onto an especially large screen, you may need to increase the brightness. Decrease the brightness for dark rooms or small screens; this also reduces power consumption and fan noise, and helps to prolong the life of the lamp.

  • Page 37: Sharpness And Picture Quality Settings

    ■ HDMI Video Range Signal > Advanced > HDMI Video Range Note: This setting can be used only when HDMI1 or HDMI2 is selected as the image source (see page 24). This setting cannot be used when the Color Mode is set to x.v. Color (see page 29).

  • Page 38: Noise Reduction

    ■ Progressive Signal > Progressive Converts interlaced to progressive signals. The projector uses 3D DigiScan Circuitry Processing for video-sourced images. For film-sourced images, you can select from 2-3 or 4-4 pulldown detection. Leave the setting on Select for watching videos captured with a video camera. Set to Video appears with the Note: This setting can be used only when viewing composite video or S-video signals, or 480i...

  • Page 39: Color Settings

    ■ 4-4 Pull-down Signal > Advanced > 4-4 Pull-down Note: This setting can be used only when viewing NTSC, M-PAL, or PAL60 signals input through the Video or S-Video ports, or 480i, 1080i/60Hz, or 1080p/24Hz signals input through the Component, HDMI1, or HDMI2 ports (see page 67). This setting cannot be used when the Color Mode is set to x.v.
  • Page 40 Shifts the color balance between magenta and green. ■ Abs. Color Temp. Image > Abs. Color Temp. Note: This setting cannot be used when the Color Mode is set to x.v. Color (see page 29). Shifts the color balance between red and blue, making the image appear warmer or cooler.

  • Page 41: Adjustments For Computer Images

    Use the RGBCMY settings to adjust the hue, saturation, and brightness of the six color components (red, green, blue, cyan, magenta, yellow). After adjusting each color, press to move to another menu option. You can also access this setting by pressing the button on the remote control.

  • Page 42: Selecting Memory Settings And Resetting The Projector

    ■ Tracking Signal > Tracking Adjust the tracking to eliminate vertical bands. It is easiest to adjust the tracking when the image contains a lot of fine detail (such as black text on a white background). ■ Sync. Signal > Sync. Adjust the synchronization to eliminate blurriness.

  • Page 43: Creating Memory Settings

    Creating Memory Settings Memory settings store the Brightness and Contrast settings, Color Mode, Auto Iris, Brightness Control, Sharpness, and other color settings described on page 39. 1. Press the button on the remote control. Memory 2. Select Save Memory 3. Select the memory name you want to use, then press the settings.

  • Page 44: Resetting The Projector

    Resetting the Projector If the image quality isn’t what you expect, one or more settings may be adjusted improperly. If necessary, you can restore the projector to its factory-default (original) settings. To restore the settings in a specific menu (such as the Image or Settings menu), open that menu, select , and confirm as needed.

  • Page 45: Customizing Projector Features

    Customizing Projector Features Use the settings in this section to adjust the image size and position, suppress on-screen text, and select basic setup options. Image Sizing Before adjusting any of these settings, make sure you have already selected an appropriate aspect ratio for the type of picture you’re viewing (see page 28).

  • Page 46: Screen Options

    Screen Options ■ Messages Settings > Display > Messages Turn this setting off if you want to prevent on-screen messages from appearing (such as the no-signal message, or the identifying text that appears when you switch between image sources or color modes). ■...

  • Page 47: Child Lock

    ■ Component Settings > Input Signal > Component Change this setting to match the type of equipment connected to the Component port. For component video, select or select YCbCr YPbPr ■ Trigger Out Settings > Trigger Out Turn on this setting if you want the the projector is operating.
  • Page 48 Making Detailed Adjustments...

  • Page 49: Maintenance

    Maintenance Your projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. You also may need to clean the air filter to prevent overheating. Warning: Before you clean any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp and filter covers.

  • Page 50: Cleaning The Projector Case

    Cleaning the Projector Case Before you clean the case, turn off the projector and unplug the power cord. ■ To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth. ■ To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent.
  • Page 51 7. Gently tap both sides of the air filter against a hard surface four or five times to remove loose dust from the air filter. Note: Do not tap the filter too hard. This can cause it to bend or break. 8.

  • Page 52: Replacing The Lamp

    Replacing the Lamp The projection lamp lasts for up to 4000 hours. You can use the long it’s been in use (see page 55). It’s time to replace the lamp when: ■ The projected image gets darker or starts to deteriorate. ■...
  • Page 53 5. Insert the screwdriver that came with the lamp (or a similar tool) into the slot on the back of the projector to release the lamp cover. Then lift up the cover to remove it. 6. Loosen the two screws securing the lamp (they don’t come all the way out). 7.
  • Page 54 8. Gently insert the new lamp and tighten its screws. Caution: Don’t touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure. 9. Replace the lamp cover. (The projector won’t work if the lamp cover is open or loose.) 10.

  • Page 55: Resetting The Lamp Usage Timer

    Resetting the Lamp Usage Timer After replacing the lamp, plug the projector back in, turn on the power switch on the back, and press the P button. Then follow these steps to reset the lamp usage timer: Power 1. Press the button on the projector or remote control.

  • Page 56: Storing The Projector

    Storing the Projector If you need to store the projector for an extended time, do the following: ■ Make sure the temperature of the storage area is within 14 to 140 °F (–10 to 60 °C). ■ Attach the lens cover and retract the feet. ■...

  • Page 57: Problem Solving

    Problem Solving This section explains how to interpret the projector’s status lights, solve problems with the picture and remote control, and contact technical support. What To Do When the Lights Come On or Flash The lights on top of the projector indicate the projector’s status and let you know when a problem occurs.
  • Page 58 Lights indicating a problem Light state All lights are off The temperature light flashes orange and the power icon is flashing The temperature light is red The lamp light flashes orange and power icon is flashing The lamp light flashes red Both warning lights are flashing The temperature...

  • Page 59: Solving Picture Problems

    Solving Picture Problems You cannot turn on the projector. ■ Make sure the power cord is connected and the power switch in back of the projector is turned on. Then wait a moment for the Ppower icon to light up before pressing the Ppower button.
  • Page 60 You’re using a computer and no picture appears on the screen. If you’re using a Windows ■ Press the function key that lets you display on an external monitor. It’s often labeled with an icon such as key while pressing it. Check your laptop’s manual or online help. On most systems, the projector, or display on both at the same time.
  • Page 61 The picture is upside-down or reversed. Change the setting in the Settings menu (see page 46). Projection The picture isn’t rectangular. ■ If the image looks like screen and angled toward it. Face the projector straight ahead (instead of at the center of the screen), then use the horizontal lens shift dial to center the image (see page 25).

  • Page 62: Solving Remote Control Problems

    The colors on the screen don’t look right. ■ Make sure the Input Signal page 46). ■ Press the Color Mode page 29). ■ Check the brightness and contrast settings (see page 35). ■ Fine-tune the colors with the settings listed on page 39. ■...

  • Page 63: Where To Get Help

    Where To Get Help Internet Support Epson provides technical assistance 24 hours a day at www.epson.com/support access troubleshooting information, download product documentation, and receive technical advice through e-mail. Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card that came with your projector.
  • Page 64 Problem Solving...

  • Page 65: Specifications

    Specifications General Type of display Poly-silicon TFT active matrix Size of LCD panels 0.74 inch (18 mm) wide Lens F=2.0 to 3.17 Resolution (native format) 1920 × 1080 pixels, 1080p Brightness High mode: White light output 1600 lumens (ISO 21118 standard) Color light output 1600 lumens Low mode: White light output 474 lumens (ISO 21118 standard)

  • Page 66: Remote Control

    Remote Control Range Batteries Dimensions Height Width Depth Weight Electrical Rated frequency Power supply Power consumption Environmental Temperature Humidity Operating altitude Safety United States Canada Pixelworks DNX Specifications Approximately 30 feet (10 m) AA × 2 5.4 inches (136 mm); not including adjustable feet 17.7 inches (450 mm) 14.2 inches (360 mm);...

  • Page 67: Compatible Video Formats

    Compatible Video Formats The projector supports analog video in NTSC, PAL, and SECAM formats, and it automatically adjusts to the incoming signal. It can receive these formats as composite video, S-video, or component video— which it accepts through the Video, S-Video, and Component ports, respectively. The projector also supports digital video (SDTV, HDTV) and various monitor display formats.
  • Page 68 Analog RGB (computer display) Signal (4:3) Resolution 640 × 480 VESA 640 × 480 SVGA 800 × 600 1024 × 768 1152 × 864 1280 × 960 SXGA 1280 × 1024 1280 × 768 WXGA 1360 × 768 MAC13” 640 × 480 MAC16”...

  • Page 69: Esc/Vp21 Command Codes

    ESC/VP21 Command Codes You can use an AV controller with a 9-pin null modem serial cable to control the projector. You can download the complete ESC/VP 21 Communication Manual for home theater projectors from the Epson website at www.epson.com/support. Following are some of the available codes: Item Power ON/OFF A/V Mute ON/OFF...
  • Page 70 Specifications...

  • Page 71: Notices

    Notices Important Safety Information Follow these safety instructions when setting up and using the projector: ■ Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. ■...
  • Page 72 ■ The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. ■ Allow the lamp to cool for one hour before replacing it. ■ Unplug the projector during lightning storms or when not in use for extended periods. ■...

  • Page 73: Fcc Compliance Statement

    FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception.

  • Page 74: Declaration Of Conformity

    Declaration of Conformity According to 47CFR, Part 2 and 15 for Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers: Epson America, Inc. Located at: 3840 Kilroy Airport Way MS 3-13 Long Beach, CA 90806-2469 Telephone: (562) 290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and...

  • Page 75: Epson America, Inc. Limited Warranty

    Epson America, Inc. Limited Warranty Three-Year Projector Limited Warranty and 90-Day Lamp Limited Warranty What Is Covered: Epson America, Inc. (“Epson”) warrants to the original retail purchaser of the Epson projector product enclosed with this limited warranty statement that the product, if purchased new and operated in the United States or Canada, will be free from defects in workmanship and materials for a period of three (3) years from the date of original purchase.
  • Page 76 STATEMENTS OR REPRESENTATIONS MADE BY ANY OTHER PERSON OR FIRM ARE VOID. IN THE EVENT THE REMEDIES ABOVE FAIL, EPSON’S ENTIRE LIABILITY SHALL BE LIMITED TO A REFUND OF THE PRICE PAID FOR THE EPSON PRODUCT COVERED BY THIS LIMITED WARRANTY. EXCEPT AS PROVIDED IN THIS WRITTEN WARRANTY, NEITHER EPSON AMERICA, INC.

  • Page 77: Index

    Index Numerics 4-4 Pull-down, 39 Abs. Color Temp. setting, 40 Accessories, 11, 63 Air filter cleaning and replacing, 50 to 51 ordering, 11 Anamorphic Wide setting, 28 Anti-theft device, 8, 11 Aspect button, 10, 28, 59 Aspect ratio, selecting, 28, 45 Auto Iris setting, 36 Auto Setup, 41 Batteries, remote control, 22...
  • Page 78 Electrical requirements, 66 Epson accessories, 11, 63 Home Service, 11 PrivateLine Support, 12, 63 technical support, 12, 63 warranty, 11, 75 to 76 EPSON Super White setting, 36 ESC/VP21 command codes, 69 FCC Compliance Statement, 73 Filter, see Air filter Flickering, 38, 61 Focus ring, 27 Frame Interpolation, 39...
  • Page 79 Memory button, 10, 42 Memory settings creating, 43 renaming, 43 using, 42 Menu button, 10, 33 Menus available settings, 35 to 47 customizing display, 35 line menu, 10 using, 33 to 35 Message setting, 46 Mosquito NR, 38 Mounting projector, 17 Moving projector, 56 No image, 59 to 60 Noise Reduction, 38...
  • Page 80 Skin Tone setting, 40 Sleep mode, 47 Source buttons, 9, 10 Source, selecting image, 24 Specifications compatible video formats, 67 to 68 dimensions, 66 electrical, 66 environmental, 66 general, 65 lamp, 65 remote control, 66 Startup screen, selecting, 46 Static, 61 Storing projector, 56 Support, 12, 63 S-Video connection, 19...

Table of Contents