Testing The Printer - SII 410 User Manual

6 Close the label cover.

Testing the Printer

A quick test lets you know your printer is operating properly and that the labels
are loaded correctly.
Testing the SLP 410, 420 or 430
1 Press and hold the
2 Press and hold the
If the test is successful, the SLP 410/420/430 will print a test label.
Testing the SLP 440 or 450
1 Press and hold the
2 Press and hold the
Do not release.
3 To print the SII graphic logo:
• While holding the
4 To print the SII sample address label:
• While holding the
5 To print the density test:
• While holding the
6 To print the serial number and firmware:
• While holding the
power button for 2 seconds to turn the printer off.
form feed button while you press and release the
power button for 2 seconds to turn the printer off.
form feed button until the LED begins to flash green.
button, press the
button, press the
button, press the
button, press the
power button 1x and release both buttons.
power button 2x and release both buttons.
power button 3x and release both buttons.
power button 4x and release both buttons.
button.