Page 1
ORIGINAL INSTRUCTIONS One+ Easy Starter OES18N...
Page 2
Important! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modification.
INTENDED USE ■ If operating a power tool in a damp location is The One+ easy starter is intended to be used only by unavoidable, use a residual current device (RCD) adults who have read and understood the instructions and protected supply.
■ The One+ easy starter must only be fitted with the starter tool before you attempt to use the One+ easy starter to bit provided. Do not attempt to fit other accessories to start your engine.
■ You may make adjustments and repairs described in ■ Insert the One+ easy starter into the port on the engine. this manual. For other repairs, contact the authorised Make sure the starter is properly seated, otherwise the service agent.
■ Hazards associated with the starting of the outdoor Insert the One+ easy starter into the port petrol-powered product. Ensure that you read and on the engine. Make sure it is a good fi t to fully understand the warnings and instructions in the properly engage the interlock pin.
PRODUCT SPECIFICATIONS One+ Easy Starter Model OES18N Rated voltage 18 V Starter bit type Triangle and pentagon Torque at rated speed 5 Nm Vibration level (in accordance with EN 60745-1 and EN 60745-2-2) Vibration 0.6 m/s Uncertainty 1.5 m/s Noise emission level (in...
Page 16
Imported by: Techtronic Industries (Australia) Pty. Ltd. 31 Gilby Road, Mount Waverley, VIC 3149, Australia Techtronic Industries New Zealand Ltd. 2 Landing Drive, Mangere, Auckland, New Zealand 2022 960931692-01...