Passive video balun with ground loop isolator (2 pages)
Summary of Contents for SECO-LARM Enforcer Video EVT-PB1-H05Q
Page 1
Video, Power and Data Balun The ENFORCER EVT-PB1-H05Q Video, Power and Data (VPD) Balun with Voltage Booster combines the flexibility of a VPD Balun with the ability to boost insufficient voltage for use in CCTV applications. Boosted DC power is regulated to provide stable power suitable for voltage sensitive cameras.
ENFORCER Video, Power and Data Balun with Voltage Booster Specifications: Output voltage Operating voltages Output current Voltage input LED indicator Voltage output LED indicator Current protection Range Video format Maximum input Insertion loss Return loss Common mode rejection Frequency response Power Wire type Wire category...
Page 3
ENFORCER Video, Power and Data Balun with Voltage Booster Installation: 1. Run UTP cable to the camera where the VPD balun is being installed. 2. Remove the cover by simultaneously pressing down on the top cover, and lifting up on the side mounting tabs.
ENFORCER Video, Power and Data Balun with Voltage Booster Voltage Booster Efficiency Rate: The EVT-PB1-H05Q has a power efficiency rating of 85%. Under typical conditions, the booster will provide sufficient power to compensate for long cable runs. The following formulas can be used to determine if enough power is present at the power input of the voltage booster: 1.