Download Print this page

Verbatim Portable USB Audio Bar User Manual

Advertisement

Quick Links

Portable USB Audio Bar
User Guide
Setup Instruction
1. Place the audio bar on the top of the LCD monitor of your Laptop or Netbook
2. Turn down the attached clip on the back of the USB Audio Bar to secure into
position
3. Plug the USB cable into the USB port on your laptop or netbook
4. Make sure the power of your laptop is on to power on your audio bar
NOTE: Some times Windows ME may not automatically detect the USB Audio device. If this occurs
open the Control Panel within Settings on the Start up Menu and open the Sounds and Audio
Devices option.
Select the Audio page and switch the Default Device to USB Device or C-Media USB Audio, and
click Apply.
Limited Warranty Terms
Verbatim Limited warrants this product to be free from defects in material
and workmanship for a period of 2 years from date of purchase. This warranty
excludes batteries. If this product is found to be defective within the warranty
period, it will be replaced at no cost to you. You may return it with your original
cash register receipt to the place of purchase or contact Verbatim.
Product replacement is your sole remedy under this warranty, and this warranty
does not apply to normal wear or to damage resulting from abnormal use,
misuse, abuse, neglect or accident, or to any incompatibility or poor performance
due to the specifi c computer software or hardware used. VERBATIM WILL NOT BE
LIABLE FOR DATA LOSS OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL
DAMAGES, HOWEVER CAUSED, FOR BREACH OF WARRANTIES OR OTHER-
WISE. This warranty gives you specifi c legal rights and you may also have other
rights which vary from state to state or country to country.
NOTE: Verbatim Limited may at any time revise the content of this user guide without further notice.

Technical Support

English
Country
United Kingdom
France
Deutschland
Italia
España
Portugal
Polska
Россия
Česko
Magyarország
Hrvatska
Srbija
Instructions d'installation
1. Placez la barre audio sur le dessus du moniteur LCD de votre ordinateur
portable
2. Tournez vers le bas le clip fi xé à l'arrière de la barre audio USB pour la
maintenir en position
3. Branchez le câble USB dans le port USB de votre ordinateur portable
4. Assurez-vous que ce dernier est sous tension de sorte qu'il alimente la barre
audio
Email
support.uk@verbatim-europe.com
support.fr@verbatim-europe.com
support.de@verbatim-europe.com
support.it@verbatim-europe.com
support.es@verbatim-europe.com
support.pt@verbatim-europe.com
support.pl@verbatim-europe.com
support.ru@verbatim-europe.com
support.cz@verbatim-europe.com
support.hu@verbatim-europe.com
support.hr@verbatim-europe.com
support.rs@verbatim-europe.com
Hotline Number
00 800 3883 2222
00 800 3883 2222
00 800 3883 2222
00 800 3883 2222
00 800 3883 2222
00 800 3883 2222
00 800 3883 2222
+353 61 226586
+353 61 226586
00 800 3883 2222
+353 61 226586
+353 61 226586
Français

Advertisement

loading

Summary of Contents for Verbatim Portable USB Audio Bar

  • Page 1: Technical Support

    2. Tournez vers le bas le clip fi xé à l’arrière de la barre audio USB pour la NOTE: Verbatim Limited may at any time revise the content of this user guide without further notice. maintenir en position 3.
  • Page 2 Инструкции по установке Remarque: Parfois, Windows ME ne détecte pas automatiquement le système audio USB. Dans ce Русский cas, cliquez sur le Panneau de confi guration (via l’option Paramètres du menu Démarrer), puis ouvrez le module Sons et périphériques audio. 1.