Advertisement
Quick Links
Part# 456785
READ AND SAVE THESE INSTRUCTIONS
ENERGY RECOVERY MODULES
Models ERM-36 & 52
InstallatIon, operatIon and MaIntenance Manual
RECEIVING AND HANDLING
The ERM is thoroughly inspected and test run at the factory. However, damage may occur during shipping
and handling. Upon delivery, inspect the unit for both obvious and hidden damage. If damage is found, record
all necessary information on the bill of lading and file a claim with the final carrier. In addition, ensure all
accessory items are present. Some accessory items are stored inside the unit during shipping.
SAFETY WARNING
Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or
death. Read this installation, operation, and maintenance manual thoroughly before installing or servicing this
equipment. Installation and service must be performed by a qualified installer, service agency, or the gas supplier.
SAVE THIS MANUAL
This manual is the property of the owner, and is required for future maintenance.
This manual should remain with each ERM unit when the job is complete.
February 2007
Advertisement
Related Manuals for Greenheck ERM-36
Summary of Contents for Greenheck ERM-36
- Page 1 Part# 456785 READ AND SAVE THESE INSTRUCTIONS ENERGY RECOVERY MODULES Models ERM-36 & 52 InstallatIon, operatIon and MaIntenance Manual RECEIVING AND HANDLING The ERM is thoroughly inspected and test run at the factory. However, damage may occur during shipping and handling. Upon delivery, inspect the unit for both obvious and hidden damage. If damage is found, record all necessary information on the bill of lading and file a claim with the final carrier.
-
Page 2: Table Of Contents
Note: To reduce unit weight for handling purposes, the cassette may be removed from the cabinet (reduces ERM-36 from 193 lbs. to 75 lbs., reduces ERM-52 from 330 lbs. to 110 lbs.). 1. To remove the cassette from the cabinet, remove the access panel and unplug the wheel drive motor at the electrical receptacle in the cabinet. -
Page 3: Start-Up
START-UP SAFETY CAUTION! SAFETY DANGER! Use caution when removing access panels or other Electric shock hazard. Can cause injury or death. unit components, especially while standing on a Before attempting to perform any service or ladder or other potentially unsteady base. Access maintenance, turn the electrical power to unit to OFF. -
Page 4: Dimensional Data & Specifications
Provide proper clearance for cassette inspection, service or removal. Do not install ducting, piping or wiring where it will interfere with cassette removal. Inspection Model Removal or Service ERM-36 22 inches 42 inches ERM-52 30 inches 58 inches ROUTINE MAINTENANCE Once the unit has been put into operation, a routine maintenance program should be set up to preserve reliability and performance. -
Page 5: Energy Recovery Wheel
In the unlikely event that a wheel bearing fails, the bearing is behind a removable plate on the wheel support beam (slide cassette halfway out of cabinet to access). Contact the local Greenheck representative for detailed instructions on how to replace the bearing. Wheel Bearing... -
Page 6: Parts List
Warranty Greenheck warrants this equipment to be free from defects in material and workmanship for a period of five years from the purchase date. This warranty limits our responsibility to repairing or replacing, to the original purchaser, any part or parts of said equipment found to be defective upon examination by representatives of Greenheck.