Table of Contents
Advertisement
Usethisconnection if yourcable system connects
directly toyourTV/VCRwithoutaconverter box.
Withthisconnection you1)canuseyourTV/VCR
Remote C ontrol t oselect channels 2 )program one
or moreunscrambled c hannels for unattended
recording.
From Cable System
75-ohm
Coaxial Cable
/"F']
_
I_]_
(Not supplied)
L____
-©©
_
II_i'JI _ [_o_
When using an external input signal, connect the
audio/video
cable to the AUDIO IN, VIDEO IN
jacks. To use the external input jack, selet the AUX
position. Press CH. "A" or "V" button or enter "00"
with number
button so that AUX appears
on the
screen.
If your cable service supplies
you with a converter
box you can use the basic connection
shown here.
From Cabl6 System
_._l_
CATV Box,,(Notsupplied)
c5aOiha/Cable
fl
_
_
13J"
With this connection
you can record and view any
channel
including
scrambled
channels.
However
channel selection must be made at the cable com-
pany
converter
box. This means
that
channels
cannot
be changed
using
the TV/VCR
Remote
Control.
Unattended
recording
is limited
to one
channel at a time.
TO RECORD AND VIEW A SCRAMBLED/UN-
SCRAMBLED
CHANNEL
1. Set the TV/VCR channel selector to the output
channel of the Cable Converter Box. (Ex. CH3)
2. Select the channel to be recorded
or viewed on
the Cable Converter Box.
AUX
Note to CATV system installer
This reminder
is provided
to call the CATV system installer's
attention
to Article 820-40 of the NEC
that provides
guidelines
for proper grounding
and, in particular,
specifies that the cable ground shall
be connected
to the grounding
system of the building
as close to the point of cable entry as practical.
-11-
Advertisement
Table of Contents
