Using The V.smile ® Motion; Wireless Controller; How To Attach The Wrist Strap To The Controller; Connecting To The Console - One-Player Mode - VTech V.Smile Motion User Manual

using the V.smile

how to Attach the Wrist strap to the Controller

• Locate the wrist strap attachment on the bottom of the controller. Attach the wrist strap
through the hole. (Figure 1)
• Place your hand through the wrist strap, so that the strap fits comfortably on your wrist.
Hold the controller firmly in your hands while playing. (Figure 2)

Connecting to the Console - one-Player Mode

• Locate the PLAYER 1/OFF/PLAYER 2 Switch on the bottom of the controller. Move the
switch to PLAYER 1. (Figure 3)
Note: When only one wireless joystick is connected, please set the controller to PLAYER 1.
• Make sure the controller's Motion Sensor Signal is directly facing the V.Smile
console. (Figure 4)
Motion
tm
• When the Motion Sensor Signal Lights and the light on the V.Smile
stop blinking, the connection is complete. (Figure 5)
• Move the PLAYER 1/OFF/PLAYER 2 Switch to OFF when controller is not in use. (Figure 6)
(Figure 3)

Connecting to the Console - two-Player Mode

• Locate the PLAYER 1/OFF/PLAYER 2 Switch on the bottom of the controller. Move
the switch to PLAYER 2. (Figure 7)
• Repeat the steps above to be sure the controller is connected for PLAYER 2.
®

Wireless Controller

Motion
tm
(Figure 1)
V.smile ® Motion Console
tm
(Figure 4)
(Figure 7)
(Figure 2)
®
Motion
(Figure 5)
®
console
tm
(Figure 6)