Hook Up Your System; Desk Phone Setup Details - Plantronics Savi 8200 Series User Manual

Hook up your system

Desk phone setup details

Using the diagram, connect your headset system.
Choose a desk phone setup A, B or C
A Desk phone (standard)
• Connect one end of the telephone interface cable to the back of the base
• Disconnect the handset coil cord from the base of the desk phone and re-connect it to the
telephone interface cable junction box.
• Finally connect the remaining end of the telephone interface cable into the open handset port
on the desk phone.
NOTE
If your phone has a built-in headset port, you should only use the headset port if you will
not be using the HL10 lifter. In this configuration, you must press both the headset button on your
phone and the call control button on the headset to answer or end calls.
and connect cables.
USE
6