Ajustes De Audio] - Sony BDP-S4100 Operating Instructions Manual

[Ajustes de audio]

x [Salida de audio digital]
[Automático]: Normally select this.
Outputs audio signals according to the
status of the connected devices.
[PCM]: Outputs PCM (pulse code
modulation) signals from the DIGITAL
OUT (COAXIAL)/HDMI OUT (high-
definition multimedia interface out)
jack.
x [Modo de salida DSD]
[Activar]: Outputs DSD (direct stream
digital) signals from the HDMI OUT
(high-definition multimedia interface
out) jack when playing a Super Audio
CD (super audio compact disc). When
[Activar] is selected, no signal is output
from other jacks.
[No]: Outputs PCM (pulse code
modulation) signals from the HDMI
OUT (high-definition multimedia
interface out) jack when playing a Super
Audio CD (super audio compact disc).
x [Ajuste de MIX audio BD]
[Activar]: Outputs the audio obtained by
mixing the interactive and secondary
audio to the primary audio.
[No]: Outputs the primary audio only.
Select this to output HD (high definition)
audio signals to an AV (audiovisual)
amplifier (receiver).
28
x [DTS Neo:6]
[Cinema]/[Music]: Outputs the
simulated multi-channel sound from 2
channel sources via the HDMI OUT
(high-definition multimedia interface
out) jack according to the capability of
the connected device using DTS Neo:6
Cinema or DTS Neo:6 Music mode.
[No]: Outputs the sound with its original
number of channels via the HDMI OUT
(high-definition multimedia interface
out) jack.
x [Audio DRC]
[Automático]: Performs playback at the
dynamic range specified by the disc
(BD-ROM (Blu-ray Disc read-only
memory) only). Other discs are played
back at the [Activar] level.
[Activar]: Performs playback at a
standard compression level.
[No]: No compression works. A more
dynamic sound is produced.
x [Mezcla]
[Envolventes]: Outputs audio signals
with surround effects. Select this when
connecting an audio device that supports
Dolby Surround (Pro Logic) or DTS
(digital theater systems) Neo:6.
[Estéreo]: Outputs audio signals without
surround effects. Select this when
connecting an audio device that does not
support Dolby Surround (Pro Logic) or
DTS (digital theater systems) Neo:6.